Call 08048578212 74% Response Rate

Send Email

Hydraulic Ferrule Tube Fittings

These fittings are the most widely used bite type fittings in the world. This fitting is a flareless bite type metric fitting that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule "bite" into the outer surface of the tube ensuring the necessary holding power for high operating pressures. Available in three series, this tube fittings and accessories are manufactured in accordance with DIN 2353 for fluid applications. Three series of these tube fittings (LL, L and S) and accessories are manufactured in accordance with DIN 2353 on the basis of decades of experience. The three components of fittings are designed and manufactured to produce a strong, reliable, leak-free joint upon proper assembly.

weld nipple fittings with an O-ring seal between weld nipple and fitting

Body give innpnessive tear out resistance and sealing integrity Weld Nipples SKA conform with DIN 3865 form A Fitting bodies and nuts are fully interchangeable for weld nipple and for pregressive ring fittings of the same series and external tube diameter.

Materials and surface protection:

Steel phosphated and oiled. O-ring of NBR (e.g. Perbunan). Stainless steel 1.4571, O-ring of FPM (e.g. Viton)

Nominal Pressure (PN) of complete Weld Nipple fittings

The nominal working pressure (PN) of a complete weld nipple fitting is dependent upon the least rated component, i.e. tube, weld nipple or fitting. The component out of these three with the lowest rated pressure or working pressure determines Die nominal pressure (PN) of the complete fitting.

Permissible temperature range:

For weld nipples, tube bends with weld nipples and ASK types of steel with O-rings of

NBR (e.g. Perbunan): -35°Cto + 100°C FPM (e.gviton) : -25°Cto + 200°C Without pressure reductions.For temperature range and necessary pressure reductions for weld nipples, weld nipple fittings and AS K types of 1.4571.

TUFIT Hydraulic Fittings

TUFIT Hydraulic Fittings

Product Price: Rs 50 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Brochure

Product Details:
Fitting TypeTee
End Connection TypeThreaded
Usage/ApplicationGas Pipe
TypeFerrule
Thread SizeBSP
MaterialSS
Size2 inch-3 inch
Head CodeHexagonal
Pressure Rating500 Bar
Country of OriginMade in India
Pack TypeBox

Tube fitting consist of three main parts, namely fitting body, coupling nut and a ferrule (which is also termed as cutting ring, progressive ring etc) Tube fittings are suitable for metric size tubes.Imperial size tube fittings are also manufactured by. Original Metric fitting design is based on German standard. i.e. DIN 2353. Later International Standards Organization formed a technical committee and released a standard as ISO 8434 as a basic standard. "TUBE fittings as a broad term used by different industries with different fitting arrangement based on the application.

Many types are tube fitting designs are available as mentioned below; Ferrule type / Flare less Weld on nipples 37?? flared fittings O-ring face seal fittings ISO has released different standards for all above types of tube fittings. The design of tube fitting body, coupling nut and ferrules are based on ISO standards.

The dimensions and the requirements are well defined by these standards. Some of the key parameters of the fitting design are left to the manufacturer to have their choice of design specifications.TUBE fitting body has 24 ?? cone with excellent surface finish for to get lower friction during assembly and with a provision to receive a tube with metric threads. Coupling nut has also metric internal threads with a support flange inside to drive the ferrule during assembly process. Ferrule design is very special in its geometry and metallurgy. The design has TWIN cutting edges which firmly grips the tube after assembly thereby creates a leak proof joint. has such tube fittings in many sizes and different configurations. Download our product catalogue for detailed information or contact our Marketing and sales team or our Distributors.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Delivery Time: READY STOCK
Get Best QuoteRequest Callback
Tufit Straight Coupling

Tufit Straight Coupling

Product Price: Rs 50 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Size1/8-2 inch
End Connection TypeThreaded
Type of CouplingFull
ApplicationHydraulic Pipe
MaterialSS
Country of OriginMade in India

Straight Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting Straight Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard Union is used to connect 2 tube in a straight line Union can be used with ferrule or weld nipple

Get Best QuoteRequest Callback
Tufit Swivel Elbow

Tufit Swivel Elbow

Product Price: Rs 125 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Usage/ApplicationHydraulic Pipe
Elbow Bend Angle90 Degree
ApplicationHydraulic Pipe
ConnectionMale, Female
MaterialSS
Packaging TypeBox
Country of OriginMade in India
Hardness70 HRC

Swivel Elbow -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting:

Features:

Swivel Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard

Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel

Swivel Elbow is used to get proper position during Hydraulic Piping

Swivel Elbow can be used with ferrule or weld nipple

Get Best QuoteRequest Callback
Weld Nipple

Weld Nipple

Product Price: Rs 40 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Size1/2 inch
MaterialSS
End Connection TypeButtweld
ApplicationHydraulic Pipe
Head CodeRound
Country of OriginMade in India
Working Pressureup to 6600 psi
Weld Nipple -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting:

Features:
  • Weld Nipple is manufactured as per DIN 2353 Standard / ISO 8434 -4 standard
  • It is used instead of Ferrule in tube fittings for High pressure rating
Get Best QuoteRequest Callback
Tufit Swivel Male Stud Coupling

Tufit Swivel Male Stud Coupling

Product Price: Rs 65 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
End Connection TypeThreaded
Usage/ApplicationGas Pipe
MaterialSS
ApplicationHydraulic Pipe
Pressure Rating6000PSI
Head CodeHexagon
ShapeRound
Country of OriginMade in India

Swivel Connector -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting:

Features:

Swivel Connector is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard

Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel

Get Best QuoteRequest Callback
Male Stud Elbow

Male Stud Elbow

Product Price: Rs 98 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Size2 inch
End Connection TypeThreaded
Thread Size6MM TO 42MM
ConnectionMale, Female, Welded
Elbow Bend Angle45 Degree
MaterialSS
ApplicationHydraulic Pipe
Male Elbow-- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting,

Features:
  • Male Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • One end is connected to the tube and other end is connected to port
  • Male Elbow can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF
Get Best QuoteRequest Callback
Tufit Male Stud Coupling

Tufit Male Stud Coupling

Product Price: Rs 50 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Size6mm to 42mm
End Connection TypeThreaded
Type of CouplingHalf
Usage/Applicationhydraulic pipe line
MaterialStainless Steel
Type Of PipesOD OF TUBE
Pressure Rating400 BAR
Thread SizeMETRIC, BSPP
Material GradeSTEEL,STAINLESS STEEL
Head Code7307
RangeMALE STUD CCOUPLING
ConditionNew
Country of OriginMade in India

Male Connector-- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting

Male connector is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard

One end is connected to the tube and other end is connected to port

Male Connector can be used with ferrule or weld nipple

Port end can be NPT, BSPP, BSPT, UNF

Get Best QuoteRequest Callback
Tufit Equal Elbow

Tufit Equal Elbow

Product Price: Rs 75 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
MaterialSS
Elbow Bend Angle90 degree
End Connection TypeThreaded
Usage/ApplicationPlumbing Pipe
ApplicationHydraulic Pipe
Thread Size6 mm To 42 mm
Country of OriginMade in India

Equal Elbow Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting Equal Elbow Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard Elbow Union is used to connect 2 tube in a 90 Deg angle Elbow Union can be used with ferrule or weld nipple

Get Best QuoteRequest Callback
Banjo Elbow

Banjo Elbow

Product Price: Rs 150 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
End Connection TypeThreaded
MaterialSS
Country of OriginMade in India
Packaging TypeBox
Head CodeHexagon
Working Pressureup to 6000 psi
TechnicsForged
Benjo Elbow -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting:

Features:
  • Benjo Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Benjo Elbow is used to get proper position during Hydraulic Piping
  • Benjo Elbow can be used with ferrule or weld nipple
Get Best QuoteRequest Callback
Bulkhead Union

Bulkhead Union

Product Price: Rs 150 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Size2 inch
MaterialBrass
ApplicationHydraulic Pipe
TechnicsForged
Working Pressure825 bar
Head CodeHexagon
Bulkhead Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingBulkhead Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardBulkhead Union is used where panel or deck mounitng is required.Bulkhead Union can be used with ferrule or weld nipple
Get Best QuoteRequest Callback
Hydraulic Cold Forging Nut

Hydraulic Cold Forging Nut

Product Price: Rs 12 / NumberGet Best Price

Minimum Order Quantity: 500 Number

Product Details:
Size1/4 Inch
ShapeHexagonal
Country of OriginMade in India
MaterialCopper
Packaging TypeBox
Surface FinishPowder Coated
Whether it’s a pneumatic or hydraulic system, we have the brass fittings and valves to make the connections you need. From compression fittings to ball valves, we house the largest selection of Brass fittings and valves in the industry. Simply click on the Product Range link above to view the many products that we offer.

Advantages
  • All pipe fitting threads are made to Dryseal standards. Connectors,


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Delivery Time: RESDY STOCK
Get Best QuoteRequest Callback
Tufit Equal Tee

Tufit Equal Tee

Product Price: Rs 90 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Type of TeeEQUAL TEE
End Connection TypeFERRULE TYPE
Usage/ApplicationHYDRAULIC OIL
MaterialSS, MS
ApplicationGas Pipe, Hydraulic Pipe
Surface FinishAnodized
TechnicsForged
Item CodeEQUAL TEE
Country of OriginMade in India

Equal Tee Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting Equal Tee Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard Tee Union is used to connect 3 tube in a T direction Tee Union can be used with ferrule or weld nipple Reducing can be at centre of side

Get Best QuoteRequest Callback
Tufit Swivel Tee

Tufit Swivel Tee

Product Price: Rs 250 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
Usage/ApplicationHydraulic Pipe
MaterialMS, Brass, CS
ApplicationHydraulic Pipe
Thread Size6MM TO 42MM
Model Name/NumberSwivel Tee
Packaging Type600 bar
Country of OriginMade in India

Swivel Branch Tee -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting

Swivel Branch / Run Tee is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard

Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel

Swivel Branch Tee can be used with ferrule or weld nipple

Get Best QuoteRequest Callback
Weldable Straight Coupling Union

Weldable Straight Coupling Union

Product Price: Rs 145 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
MaterialCarbon steel,Stainless Steel
Sizemetric
ApplicationChemical Fertilizer Pipe, Pneumatic Connections, Hydraulic Pipe
Usage/ApplicationHydraulic Pipe
ColorWHITE
Thread SizeMETRIC,BSPP
O/D Tube6MM TO 42MM
Max Pressure600 BAR
Country of OriginMade in India
Weldable Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting Weldable Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard Weldable Union is used where panel or deck mounitng is required.Weldable Union can be used with ferrule or weld nipple
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Hydraulic Ferrule Tube Fittings"?
Thank youYour Enquiry has been sent successfully.
© Hans Hydraulic & Pneumatics Systems. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.