View Mobile No.

Send Email

Parker EO and EO-2 Metric Bite Type Fittings

The flareless bite type fitting was pioneered by Ermeto in Germany in the early 1930’s. When Parker Hannifin acquired Ermeto, it introduced the EO fittings to the US. Today, the EO fittings are the most widely used bite type fittings in the world. The EO progressive ring fitting is a flareless metric fitting (for metric tube)that consists of a body, a progressive ring (ferrule) and a nut. On assembly, two cutting edges of the progressive ring “bite” into the outer surface of the tube ensuring the necessary holding power and seal for high operating pressures.

The fittings and components listed in this catalog are intended solely for the assembly of connections for fluid applications. Three series of EO tube fittings (LL, L and S) and accessories are manufactured in accordance with DIN 2353 (summary) which today is represented by international standard 8434-1 on the basis of decades of experience.* To ensure functional safety of EO tube fittings, only EO parts should be used in their assembly. Routing of tubes should be carried out in accordance with Parker/EO recommended practices. Assembly instructions are available.


The EO progressive ring fitting produces a low to high pressure, leak free connection of tubes and components in fluid systems. The basic function of the EO progressive ring is the controlled progressive bite of the ring into the tube due to a unique internal geometry.
EO/EO-2  Equal Tee, Union - T

EO/EO-2 Equal Tee, Union - T

Product Price: Rs 850 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
MaterialSS
Usage/ApplicationHydraulic Pipe
TypeFerrule
Thread SizeOD OF TUBE
Is It Rust ProofRust Proof
GradeSteel zinc plated (CrVI-free),Stainless steel
Part No.EO/EO2 EQUAL TEE - T
Port SizeBite Type,Soft Seal Bite Type
StyleStraight,Elbow,Tee,Cross,Straight reduction,TEE reduction,Bulkhead straight,Bulkhead elbow
Techniquena,Pre-assembled with nut and EO-PSR cutting ring,Pre-assembled with EO-2 functional nut,Pre-asse
Diameter04 TO 42MM
FeaturesManufacturing Equipment,Marine,Material Handling,Mobile Equipment,Oilfield,Packaging,Transpor
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Elbow, Bulkhead Union Elbow - WSV, 24 Degree Flareless

EO/EO-2 Elbow, Bulkhead Union Elbow - WSV, 24 Degree Flareless

Product Price: Rs 1,985.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
SizeOD OF TUBE
Usage/ApplicationHYDRAULIC ,AIR,GAS,OIL
ConnectionBite Type, Soft Seal Bite Type
MaterialSteel zinc plated (CrVI-free),Stainless steel
BrandPARKER ERMETO
Material GradeSteel zinc plated (CrVI-free),Stainless steel
Is It Rust ProofRust Proof
Thread SizeEO 24 Degree cone end
Connector TypeEO 24 Degree cone end
Pressure10-80 MPa,100-800 bar,1450-11603 psi
ShapeTEE reduction,Bulkhead straight,Bulkhead elbow
Thread TypeMetric
SeriesVery light,Light,Heavy 04 to 42mm
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Male Connector, Male Stud Coupling, BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED,
  • EO/EO-2 Male Connector, Male Stud Coupling, BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED,
  • EO/EO-2 Male Connector, Male Stud Coupling, BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED,

EO/EO-2 Male Connector, Male Stud Coupling, BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED,

Product Price: Rs 500 / UnitGet Best Price

Minimum Order Quantity: 50 Unit

Product Details:
MaterialSS
End Connection TypeThreaded
Type of CouplingReducing
TypeFerrule
FinishingPolished
Size1 inch, 3/4 inch, 1/2 inch, 2 inch
ApplicationHigh Pressure, Structure Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Gas Pipe, Pneumatic Connections
Connection TypeWelded, Male, Female, Bite Type, Soft Seal Bite Type
Thread SizeMale metric thread - O-ring (ISO 6149),Male metric thread - ED (ISO 9974),Male BSPP thread - ED (I
BrandPARKER ERMETO - EO
Connector TypeEO/EO-2 Male Connector,Male Stud Coupling,BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED
Temperature+250 Steel,+400 Stainless Steel DegreeC +482 Steel,+752 Stainless Steel DegreeF
Is It Rust ProofRust Proof
Thread TypeG 1/8 A to G 1 1/2 A; M 10x1.0 to M48x2.0; 7/16-20UNF-2A to 1 5/8-12UN-2A; 1/8-27 NPT to 1 1/2-11.5
Pressure Rating10-80 MPa 100-800 bar 1450-11603 psi
ShapeEO/EO-2 Male Connector,Male Stud Coupling,BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED
RangeMALE CONNECTOR
Rubber RingWITH SEAL
Temperature Rating+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel DegreeF
Diameter04 to 42 mm,EO 24 Degree cone end,Very light,Light,Heavy
GradeSteel zinc plated (CrVI-free),Stainless steel
Operating Pressure10-80 MPa,100-800 bar,1450-11603 psi
Part No.EO/EO-2 Male Connector,Male Stud Coupling,BSPP Thread Metal Seal GE-R-ED / GEO / GE-M-ED
StyleEO/EO-2 Male Connector,Male Stud Coupling,BSPP
Steel GradeSteel zinc plated (CrVI-free),Stainless steel
Usage/ApplicationAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
EndsMale BSPP thread - ED-seal (ISO 1179)
Item CodeGE-R,GE-R-ED,GE-M,GE-M-ED,GEO
Pressure10-80 MPa,100-800 bar,1450-11603 psi
Working Pressure10-80 MPa,100-800 bar,1450-11603 psi
I Deal InNew Only

Parker GE-R | Straights for Metric Bite-Type Fittings | EO

 Parker Ermeto fittings are a great choice for leak free connections under various service conditions ranging from sealing high vacuum and small molecule gases, to high-pressure hydraulic fluids. EO fittings’ compact design makes them ideal for plumbing applications in limited or tight space.


The main function of Ermeto DIN male stud high pressure hydraulic tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings, types GEO, GE-M-ED, GE-R-ED up to GE-M is available in steel with Cr(VI)-free surfaces and in a stainless steel version. Depending on the specific application, these fittings can be delivered with cutting ring (EO-PSR or DPR) or elastomeric seal (EO-2).

    Markets:
    • Automotive
    • Defence
    • Energy
    • Environment
    • Industrial
    • Infrastructure
    • Machine Tools
    • Materials Handling
    • Mobile
    • Oil and Gas
    • Power Generation
    • Process
    • Transportation
    • Water

    Applications:                                                                                                                                            
    • Suitable for general hydraulic applications.

    Features/ benefits:
    • High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fittings.

    • Stainless steel surface: Ermeto DIN male stud high pressure hydraulic tube fittings, stainless steel version, have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance, than steel. These features extend the range of applications.

    • High pressure: Ermeto DIN male stud high pressure hydraulic tube fittings have pressure ratings of up to 800 bar (S series) and 500 bar (L series), so that the fittings can be used in a wide range of applications.
Get Best QuoteRequest Callback
EO/EO-2 Straight Coupling, Union - G

EO/EO-2 Straight Coupling, Union - G

Product Price: Rs 250 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Steel GradeCS / SS
TypeFerrule
SizeOD OF TUBE
Usage/ApplicationHydraulic Pipe
BrandPARKER ERMETO
Connection TypeFERRULE
MaterialSteel zinc plated (CrVI-free),Stainless steel
Thread SizeMETRIC
Is It Rust ProofRust Proof
O/D Tube04 TO 42MM
Rate Pressure10-80 MPa,100-800 bar,1450-11603 psi
Inner & Outer Diameter04 TO 42MM
GradeCS / SS
Part No.EO-G,EO2-G
StyleStraight,Elbow,Tee,Cross,Straight reduction,TEE reduction,Bulkhead straight,Bulkhead elbow
FeaturesAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.

Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Straight, Bulkhead Union - SV, 24 Degree Flareless

EO/EO-2 Straight, Bulkhead Union - SV, 24 Degree Flareless

Product Price: Rs 950 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
SizeOD OF TUBE
MaterialSS
Usage/ApplicationHYDRAULIC, GAS, AIR
Pressure10-80 MPa,100-800 bar,1450-11603 psi
Thread SizeBite Type,Soft Seal Bite Type
TypeTEE reduction,Bulkhead straight,Bulkhead elbow
FeaturesAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
Temperature+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel DegreeF
Diameter04 TO 42MM
Inner & Outer Diameter04 TO 42MM
BrandPARKER ERMETO
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Straight, Reducer Union - GR, 24 Degree Flareless

EO/EO-2 Straight, Reducer Union - GR, 24 Degree Flareless

Product Price: Rs 550 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Model Name/NumberEO/EO-2 Straight,Reducer Union - GR
SizeOD OF TUBE
Usage/ApplicationAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
BrandPARKER ERMETO
MaterialSteel zinc plated (CrVI-free),Stainless steel
Thread SizeMetric Od Of Tube
Thread TypeMetric Bite Type,Soft Seal Bite Type
O/D Tube04 to 42MM
ShapeStraight,Elbow,Tee,Cross,Straight reduction,TEE reduction
Pressure Resistance10-80 MPa,100-800 bar,1450-11603 psi
Stylena,Pre-assembled with nut and EO-PSR cutting ring,Pre-assembled with EO-2 functional nut,Pre-asse
Temperature+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel DegreeF
ConnectionBite Type,Soft Seal Bite Type
Inner & Outer Diameter04 TO 42MM
TypeTEE reduction,Bulkhead straight,Bulkhead elbow
I Deal InNew Only
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Swivel Elbow - EW / EVW, 24 Degree Flareless

EO/EO-2 Swivel Elbow - EW / EVW, 24 Degree Flareless

Product Price: Rs 750.00 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
SizeOD OF TUBE
TypeEO 24 Degree DKO swivel,EO stand pipe adjustable
Usage/ApplicationHydraulic Pipe
MaterialSteel zinc plated (CrVI-free),Stainless steel
Thread SizeEO 24 Degree DKO swivel,EO 24 Degree cone end,EO Stand pipe adjustable
BrandPARKER ERMETO
DescriptionEO/EO-2 Elbow,Swivel Elbow - EW,24 Degree Flareless
Maximum Working Pressure16-80 MPa,160-800 bar,2321-11603 psi
Model Name/NumberEO/EO-2 Elbow,Swivel Elbow - EW
Nominal Size04 TO 42MM
RotationSwivel Type,90 Degree Elbow
EO-PSR fittings produce high pressure, leak free connection of tubes and components in hydraulic systems. The basic function of EO-PSR is the controlled progressive bite of the EO-PSR into the tube due to a unique internal geometry.

Assembly process is according to the EO-Progressiv ring instruction. The design allows a 100 %-preassembly for an easier final assembly.
Features, advantages, benefits of the EO-PSR fitting range:

High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust.
High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series).

EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. This makes assembly easier and prevents underassembly.

Safe assembly: Two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of assembly contributes to maximum safety of assembly. Multifunctional ring geometry prevents over-tightening.

EO-PSR is available worldwide and meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications: Machine tools, mobile hydraulics, shipbuilding/offshore, transportation
Get Best QuoteRequest Callback
EO/EO-2 Swivel union, Swivel Tube Reducer Union - KOR / RED / DA Series, 24 Degree Flareless

EO/EO-2 Swivel union, Swivel Tube Reducer Union - KOR / RED / DA Series, 24 Degree Flareless

Product Price: Rs 3,050.00 / UnitGet Best Price

Minimum Order Quantity: 25 Unit

Product Details:
SizeMETRIC OD OF TUBE
TypeSwivel nut elbow,Swivel nut 45 Degree elbow,Swivel nut branch tee,Swivel nut run tee,Standpipe elbow
Usage/ApplicationHydraulic Pipe
MaterialSteel zinc plated (CrVI-free),Stainless steel
Thread SizeEO 24 Degree cone end,EO 24 Degree DKO swivel,EO Stand pipe adjustable
BrandPARKER ERMETO
DiameterMETRIC,04 TO 42MM
DescriptionEO/EO-2 Swivel union,Swivel Tube Reducer Union - KOR / RED / DA,24 Degree Flareless
Maximum Working Pressure160-800 bar 16-80 MPa 2321-11603 psi
Model Name/NumberEO/EO-2 Swivel union,Swivel Tube Reducer Union - KOR / RED / DA
Nominal Size04 TO 42MM,METRIC
RotationSwivel Reducing Union Coupling
    EO-PSR fittings produce high pressure, leak free connection of tubes and components in hydraulic systems. The basic function of EO-PSR is the controlled progressive bite of the EO-PSR into the tube due to a unique internal geometry.

    Assembly process is according to the EO-Progressiv ring instruction. The design allows a 100 %-preassembly for an easier final assembly.

    Features, advantages, benefits of the EO-PSR fitting range:

    High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust.

    High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series).

    EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. This makes assembly easier and prevents underassembly.

    Safe assembly: Two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of assembly contributes to maximum safety of assembly. Multifunctional ring geometry prevents over-tightening.

    EO-PSR is available worldwide and meets the requirements of the applicable standards for 24° cutting ring fittings.

    Applications: Machine tools, mobile hydraulics, shipbuilding/offshore, transportation
Get Best QuoteRequest Callback
EO/EO-2 Tee, Reducer Union Tee - TR, 24 Degree Flareless

EO/EO-2 Tee, Reducer Union Tee - TR, 24 Degree Flareless

Product Price: Rs 2,500 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Usage/ApplicationHydraulic Pipe
TypeFerrule
MaterialSS
Thread SizeOD OF TUBE
Is It Rust ProofRust Proof
Diameter04 TO 42MM
GradeSteel zinc plated (CrVI-free),Stainless steel
Part No.EO/EO-2 Tee,Reducer Union Tee - TR
Port SizeBite Type,Soft Seal Bite Type
StyleStraight,Elbow,Tee,Cross,Straight reduction,TEE reduction
FeaturesMarine,Material Handling,Mobile Equipment,Oilfield,Packaging,Transportation
BrandPARKER ERMETO
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
EO/EO-2 Tee, Swivel Nut Branch Tee - ET / EVT, 24 Degree Flareless

EO/EO-2 Tee, Swivel Nut Branch Tee - ET / EVT, 24 Degree Flareless

Product Price: Rs 2,050.00 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Size1/2 inch
MaterialSS
End Connection TypeThreaded
Usage/ApplicationHYDRAULIC
TypeBite Type,Soft Seal Bite Type
Connection TypeWelded, Male
Thread SizeMetric Bite Type,Soft Seal Bite Type
Is It Rust ProofRust Proof
Surface FinishFinished Polished
TechnicsForged
DescriptionEO/EO-2 Tee,Swivel Nut Branch Tee - ET / EVT,24 Degree Flareless
Maximum Working Pressure160-800 bar 16-80 MPa 2321-11603 psi
Model Name/NumberEO/EO-2 Tee,Swivel Nut Branch Tee - ET / EVT
Nominal Size04 TO 42MM
CertificationCE
GradeSteel zinc plated (CrVI-free),Stainless steel
Part No.EO/EO-2 Tee,Swivel Nut Branch Tee - ET / EVT
Item CodeEO/EO-2 Tee,Swivel Nut Branch Tee - ET / EVT
StyleSwivel nut branch tee,Swivel nut run tee,Standpipe elbow,Standpipe branch tee,Standpipe run tee
Working Pressure160-800 bar 16-80 MPa 2321-11603 psi
Working Temp+250 Steel,+400 Stainless Steel DegreeC +482 Steel,+752 Stainless Steel DegreeF
Diameter04 TO 42MM OD OF TUBE
StandardDIN ISO 8434
I Deal InNew Only
BrandPARKER ERMETO
ShapeSWIVEL TEE
    The main function of Ermeto DIN tube to swivel high pressure hydraulic tube fittings is to connect different numbers of tubes or hose.This broad range of DIN tube to swivel fittings, types EW, ET, EL, EVW, EVT, EVL, DA, RED up to KOR is available in steel with Cr(VI)-free surfaces and a stainless steel version. Depending on the specific application, the fittings can be delivered with cutting ring (EO-PSR or DPR) or elastomeric seal (EO-2).

    Markets:
    • Automotive
    • Defence
    • Energy
    • Environment
    • Industrial
    • Infrastructure
    • Machine Tools
    • Material Handling
    • Mobile
    • Oil and Gas
    • Power Generation
    • Process
    • Transportation
    • Water


    Applications:                                                                                                                                                    
    Suitable for general hydraulic applications


    Features/ benefits:

    • High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fitting.

    • Stainless steel surface: Ermeto DIN tube to swivel high pressure hydraulic tube fittings, in a stainless steel version have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance than steel. These features extend the range of applications.

    • High pressure: Ermeto DIN tube to tube swivel high pressure hydraulic tube fittings have pressure ratings of up to 800 bar (S series) and 500 bar (L series), so that the fittings can be used in a wide range of applications.
Get Best QuoteRequest Callback
EO/EO-2 Tee, Swivel Nut Run Tee - EL / EVL, 24 Degree Flareless

EO/EO-2 Tee, Swivel Nut Run Tee - EL / EVL, 24 Degree Flareless

Product Price: Rs 2,500 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Thread SizeEO 24 Degree cone end,EO 24 Degree DKO swivel,EO Stand pipe adjustable
MaterialSteel zinc plated (CrVI-free),Stainless steel
Usage/ApplicationHydraulic Pipe
SizeOD OF TUBE
BrandPARKER ERMEO
ConnectionEO 24 Degree cone end,EO 24 Degree DKO swivel,EO Stand pipe adjustable
GradeSteel zinc plated (CrVI-free),Stainless steel
Model Name/NumberEO/EO-2 Tee,Swivel Nut Run Tee - EL / EVL
TypeEO/EO-2 Tee,Swivel Nut Run Tee - EL / EVL
    The main function of Ermeto DIN tube to swivel high pressure hydraulic tube fittings is to connect different numbers of tubes or hose.This broad range of DIN tube to swivel fittings, types EW, ET, EL, EVW, EVT, EVL, DA, RED up to KOR is available in steel with Cr(VI)-free surfaces and a stainless steel version. Depending on the specific application, the fittings can be delivered with cutting ring (EO-PSR or DPR) or elastomeric seal (EO-2).


    Markets:
    • Automotive
    • Defence
    • Energy
    • Environment
    • Industrial
    • Infrastructure
    • Machine Tools
    • Material Handling
    • Mobile
    • Oil and Gas
    • Power Generation
    • Process
    • Transportation
    • Water


    Applications:                                                                                                                                                    
    Suitable for general hydraulic applications


    Features/ benefits:
    • High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fitting.

    • Stainless steel surface: Ermeto DIN tube to swivel high pressure hydraulic tube fittings, in a stainless steel version have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance than steel. These features extend the range of applications.

    • High pressure: Ermeto DIN tube to tube swivel high pressure hydraulic tube fittings have pressure ratings of up to 800 bar (S series) and 500 bar (L series), so that the fittings can be used in a wide range of applications.
Get Best QuoteRequest Callback
Parker EO/EO-2  Equal Elbow, Union - W

Parker EO/EO-2 Equal Elbow, Union - W

Product Price: Rs 600 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
TypeFerrule
MaterialSS
Thread SizeOD OF TUBE
Is It Rust ProofRust Proof
Diameter04 TO 42MM
GradeSteel zinc plated (CrVI-free),Stainless steel
Part No.EO-W,EO2-W
Port SizeMETRIC OD OF TUBE
StyleStraight,Elbow,Tee,Cross,Straight reduction,TEE reduction,Bulkhead straight,Bulkhead elbow
Techniquena,Pre-assembled with nut and EO-PSR cutting ring,Pre-assembled with EO-2 functional nut,Pre-asse
FeaturesHydraulic,Manufacturing Equipment,Marine,Material Handling,Mobile Equipment,Oilfield,Packaging
BrandPARKER ERMETO
EO-PSR - Ermeto Original Progressive Stop Ring fittings (acc. DIN 3861, DIN 2353) produce the high pressure, leak-free connections of tubes, components in hydraulic systems for reliable, trouble-free functioning of the entire units. With its basic function, the controlled progressive bite of EO-PSR into the tube, due to its unique internal geometry, is perfect for a broad range of applications, markets.
Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Material Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Features/benefits of the EO-PSR fitting range:
• High corrosion resistance: The Cr(VI)-free surface treatment causes an average corrosion resistance of more than 500 hours to white rust. It also extends the life cycle of the fitting.
• High pressure: EO-PSR can be used in applications of up to 800 bar (S series) and 500 bar (L series). Stretches the range of applications.
• EO-LUB: Due to the special treatment of larger sized nuts (25S/28L and larger), the tightening torques of EO-PSR fittings have been reduced by 25%. Eases and speeds up assembly. Prevents under-assembly.
• Over-tightening protection: The special geometry of the EO-PSR prevents the over-assembly of EO-PSR fittings. Helps to avoid cost and time-consuming repair.
• Spring effect: Cost reduction because of the spring effect; re-tightening of the fitting is not necessary.
• Safe assembly: Maximum safety of assembly - two distinctive cutting edges provide a progressive increase of the tightening torque of the EO-PSR. The noticeable end point of the assembly process contributes to maximum safety of assembly.
• Multifunctional ring geometry - prevents over-tightening and additional costs for repair.
• Procurement is easy and fast. EO-PSR is available worldwide.
• Fast, easy and safe assembly - meets the requirements of the applicable standards for 24° cutting ring fittings.

Applications:
• Mobile hydraulics – hydraulic drive units, working hydraulic systems
• Power Generation – compressor stations in gas pipelines
Get Best QuoteRequest Callback
Parker Phastite Non Welded Connection Tube Fitting

Parker Phastite Non Welded Connection Tube Fitting

Product Price: Rs 3,000 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
Size1/2 inch, 3/4 inch
FinishingPolished
Material GradeSteel,stainless Steel
ApplicationGas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections
MaterialSteel
Packaging TypeBox

Phastite® for Pipe Connection System Parker Phastite Tube Fittings Non-Welded Connection System Phastite® for pipe is a breakthrough in pipe connection technology. Its innovative design combines fast installation with a simple assembly process to achieve permanent non-welded, leak-free connections quickly and easily.

When accounting for the total throughput time, a Phastite connection can be fabricated in just minutes, compared to the hours required for welded connections. What’s more, Phastite reduces overall post-welding inspection time and costs by eliminating nondestructive examination (NDE) such as radiography/X-ray and even liquid dye penetrant.

A versatile system, Phastite for pipe is:

Well suited for hydraulic, water and water/glycol, lubrication and other media

Compatible with NPS/IPS schedule pipes sizes 3/4", 1", 1-1/2" and 2"

Able to withstand pressures up to 10,000 psi/700 bar

Designed to perform at subsea depths of 15,000 feet

Meets requirements of ASME B31.1 and B31.3

Tested in accordance with ASTM F1387 

DNV RP-A203 Technical 


Qualification Program Certificate Mechanical pipe joining technology for high pressure systems operating at 4500-6000 psi is generally limited to sizes up to 3/4". This systemic shortfall is attributed to both tube and threaded fitting limitations. Such limitations have required customers to typically weld heavy schedule pipe in the 3/4" to 2" range. Welding introduces complexity, time and potential hazards for high-pressure hydraulic systems. Phastite for Pipe fills the gap between high-pressure threaded tube fittings and butt weld pipe connections.

Phastite for pipe uses a patent-pending sealing technology to provide permanent connections to off-theshelf schedule pipe. The robust design ensures a leak-free performance in even the most demanding hydraulic and gas applications, while assembly can be completed quickly and easily. After a series of fast inspection and pipe-marking guidelines, Phastite fittings are axially swaged to the pipe using a bench-mounted Parker Phastool 100. Once the collar is fully locked to the fitting body, it will not disengage – offering a permanent connection solution in just minutes!
Phastite for pipe offers greater overall efficiency with its impressive reduction of installation time. A typical complete pipe weld for 1" to 2" heavy schedule pipe (sch 160/XXS) may require many weld passes and commonly demands more than an hour for total fabrication.

In the same amount of time, as many as eight Phastite connections can be made. This radically improves the piping fabrication efficiency. Extending across multiple days and welders/fitters, piping projects can be dramatically streamlined. Phastite for pipe also allows for more consistent labor planning as fabrication times between pipe schedules are virtually the same. Further standardizing operation, one Phastool machine can be used throughout the range of schedule pipe sizes.Virtually every industrial and oil and gas performance requirement has been considered in the development and validation process. Phastite meets or exceeds typical SAE/ ISO performance requirements for mechanically attached fittings, as well as maintains both a fluidand gas-tight seal throughout an exhaustive battery of application specific performance tests. Subjected to corrosion tests well beyond the traditional intensity, Phastite has passed SCC, Splash Zone and HISC tests to ensure proven durability.

Hydraulic systems in oil and gas applications carry stringent performance requirements. Knowing Phastite achieves compliance in these applications translates to worry-free operation across other industries.

Get Best QuoteRequest Callback
Parker Complete Hydraulic Piping Assembly

Parker Complete Hydraulic Piping Assembly

Product Price: Rs 250 / MeterGet Best Price

Minimum Order Quantity: 2000 Meter

Product Details:
Usage/ApplicationHydraulic & Pneumatic pipe line
Pipeline TypeParker Hydraulic & Pneumatic pipe line fittings
Type Of Constructionplant piping Hydraulic
Installation TypeOn the Ground, Underground, Overhead
ApplicationGas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections
Single Hose Length1m-6m, 6m-12m, 12m-20m
Pipe MaterialSteel
Size6mm to 42mm
Welding Typeferrule type & weldable type
MaterialSteel , stainless Steel
Working Pressure500 bar
TechnicsForged

While tube fittings typically are not replaced at the first sign of corrosion, the cost of ownership starts to increase at that point in part due to accelerated corrosion of adjacent components. Thus, corrosion resistance on fittings and adapters can be considered either a long-term investment or short-term price decision. As seen on the opposite side of this inset, corrosion can migrate to hydraulic hoses and even to the costly hydraulic components. Magnifying this scenario across the maintenance department of a typical mobile equipment or industrial user, the cost implications of fitting corrosion can be substantial. Superior Plating gives Parker tube fittings unmatched protection against red rust. This proprietary technology enables Parker fittings to withstand the harshest operating environments, particularly those that promote the rapid onset of red rust. In fact, Parker fittings with Superior Plating are proven to resist the formation of corrosion and red rust much longer than five major competitive brands of plated fittings. The Ravages of Red Rust Corrosion is the deterioration of a substance, usually a metal or its properties because of a reaction with its environment, as defined by NACE (The National Association of Corrosion Engineers). For the customers and markets that Parker serves, corrosion causes both direct and indirect economic losses. Red Rust Deterioration of Fittings Can Cause:
Features:
System contamination
Potential leaks
Fitting connection problems
Aesthetic quality concerns from the end user
Maintenance difficulty
Improper function of adjacent components (valves, pumps, cylinders)
Accelerated corrosion of adjacent components

Unrivaled Protection Severe marine, mining, industrial and mobile applications have consistently proven our Superior Plating’s long-lasting resistance to red rust formation. Independent testing clearly illustrates it. In neutral salt spray test ASTM B117 tests conducted by accredited Miami Valley Materials Testing Center, Parker plated tube fittings remained free of red rust after 480 hours exposure, substantially exceeding the latest SAE requirement of 96 hours. Competitive fittings exhibited red rust much earlier, as shown in the results (at right). In realworld application, replacement of some or all of the fittings could be necessary, with the exception of the Parker fittings. Parker tube fittings are an integral component of any leak-free, well functioning–and well maintained– hydraulic system. To protect your operations and save fitting replacement costs, insist on the exceptional performance of Parker tube fittings with Superior Plating. Your complete source for quality tube fittings, hose & hose fittings, brass & composite fittings, quickdisconnect couplings, valves and assembly tools, locally available from a worldwide network of authorized distributors ( Hans Hydraulic & Pneumatics Systems, Delhi INDIA )
Fittings:
Available in inch and metric sizes covering SAE, BSP, DIN, GAZ, JIS and ISO thread configurations, manufactured from steel, stainless steel, brass, aluminum, nylon and thermoplastic. Hose, Tubing and Bundles: Available in a wide variety of sizes and materials including rubber, wire-reinforced, thermoplastic, hybrid and custom compounds. Worldwide Availability: Parker operates Fluid Connectors manufacturing locations and sales offices throughout North America, South America, Europe and Asia-Pacific. Tube fittings with Parker Superior Plating clearly have unrivaled corrosion and rust protection. At 480 hours with no red rust formation, the Parker fittings far exceed the 96-hour SAE requirement and resist red rust formation many times longer than the competition.

Get Best QuoteRequest Callback
EO/EO-2 DKO Swivel Connector, Swivel Connector Male BSPP With ED Seal EGE / EVGE / EGEO Flareless

EO/EO-2 DKO Swivel Connector, Swivel Connector Male BSPP With ED Seal EGE / EVGE / EGEO Flareless

Product Price: Rs 650 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
SizeG 1/8 A to G 1 1/2 A; M 10x1.0 to M48x2.0; 7/16-20UNF-2A to 1 5/8-12UN-2A; 1/8-27 NPT to 1 1/2-11.5
TypeFerrule
Usage/ApplicationHydraulic Pipe
MaterialSteel zinc plated (CrVI-free),Stainless steel
Connection TypeMale
Coupler Typeswivel stud coupling
Thread SizeBSP
Material GradeSteel zinc plated (CrVI-free),Stainless steel
Is It Rust ProofRust Proof
BrandPARKER ERMETO
Temperature+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel DegreeF
Tube Size04 to 42 mm,EO 24 Degree cone end,Very light,Light,Heavy
Connectors TypeMale BSPP,Male Metric,Male UNF/UN thread - O-ring
Nut SizeMetric
Model Name/NumberEO- EGE-R-ED,EVGE-R-ED
Part No.EO/EO-2 DKO Swivel Connector,Swivel Connector Male BSPP With ED Seal EGE / EVGE
Port SizeMale metric thread - O-ring (ISO 6149),Male metric thread - ED (ISO 9974),Male BSPP thread - ED (I
FeaturesAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
I Deal InNew Only
Parker EGE-R-ED | Straight Swivels for Metric Bite-Type Fittings | EO

EO fittings are a great choice for leak free connections under various service conditions ranging from sealing high vacuum and small molecule gases, to high-pressure hydraulic fluids. EO fittings’ compact design makes them ideal for plumbing applications in limited or tight space.

EO fittings are suitable for applications in subzero as well as elevated temperatures. The exact service temperature rating is determined by the choice of fitting material, and since EO fittings can be manufactured from a wide range of metals, it''''s compatibility with various fluids, temperatures, and atmospheric conditions is virtually limitless.

The main function of Ermeto DIN male stud high pressure hydraulic tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings, types GEO, GE-M-ED, GE-R-ED up to GE-M is available in steel with Cr(VI)-free surfaces and in a stainless steel version. Depending on the specific application, these fittings can be delivered with cutting ring (EO-PSR or DPR) or elastomeric seal (EO-2).

Markets:
• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Materials Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Applications:                                                                                                                                            
• Suitable for general hydraulic applications.

Features/ benefits:

• High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fittings.

• Stainless steel surface: Ermeto DIN male stud high pressure hydraulic tube fittings, stainless steel version, have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance, than steel. These features extend the range of applications.

• High pressure: Ermeto DIN male stud high pressure hydraulic tube fittings have pressure ratings of up to 800 bar (S series) and 500 bar (L series), so that the fittings can be used in a wide range of applications.

Get Best QuoteRequest Callback
EO/EO-2 Straight, Taper Stud Male Connector - GE-NPT / GE-KEG Series 24 Degree Flareless

EO/EO-2 Straight, Taper Stud Male Connector - GE-NPT / GE-KEG Series 24 Degree Flareless

Product Price: Rs 750.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
MaterialSteel
Usage/ApplicationAgriculture Equipment,Automotive Process,Chemical Transfer,Construction Equipment,Fuel transfer
BrandPARKER ERMETO
Connector TypeTaper Stud Connector Bite Type,Soft Seal Bite Type
ShapeEO/EO-2 Straight,Taper Stud Male Connector - GE-NPT / GE-KEG Series 24 Degree Flareless
Temperature Rating+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel DegreeF
Product TypeEO/EO-2 Straight,Taper Stud Male Connector - GE-NPT / GE-KEG Series 24 Degree Flareless
Diameter04 TO 42MM
Temperature+250 Steel,+400 Stainless Steel DegreeC,+482 Steel,+752 Stainless Steel
Operating Pressure10-80 MPa,100-800 bar,1450-11603 psi
Thread SizeG 1/8 A to G 1 1/2 A; M 10x1.0 to M48x2.0; 7/16-20UNF-2A to 1 5/8-12UN-2A; 1/8-27 NPT to 1 1/2-11.5
DesignEO/EO-2 Straight,Taper Stud Male Connector - GE-NPT / GE-KEG Series 24 Degree Flareless
Steel GradeSteel zinc plated (CrVI-free),Stainless steel
ConnectionMale short metric taper thread (DIN 3852-1,type C),Male UNF/UN thread - O-ring (ISO 11926),Male
Pressure10-80 MPa,100-800 bar,1450-11603 psi
I Deal InNew Only
The main function of Ermeto DIN male stud high pressure hydraulic tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings, types GEO, GE-M-ED, GE-R-ED up to GE-M is available in steel with Cr(VI)-free surfaces and in a stainless steel version. Depending on the specific application, these fittings can be delivered with cutting ring (EO-PSR or DPR) or elastomeric seal (EO-2).

Markets:

• Automotive
• Defence
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Materials Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Applications:                                                                                                                                            
• Suitable for general hydraulic applications.

Features/ benefits:

• High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fittings.

• Stainless steel surface: Ermeto DIN male stud high pressure hydraulic tube fittings, stainless steel version, have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance, than steel. These features extend the range of applications.

• High pressure: Ermeto DIN male stud high pressure hydraulic tube fittings have pressure ratings of up to 800 bar (S series) and 500 bar (L series), so that the fittings can be used in a wide range of applications.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Parker EO and EO-2 Metric Bite Type Fittings"?
Thank you Your Enquiry has been sent successfully.
© Hans Hydraulic & Pneumatics Systems. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.