Call 08048578212 71% Response Rate

Send Email

Parker High Pressure Quick Release Coupling

Parker is the largest quick coupling manufacturer in the world, providing quick disconnects and accessories that are appropriate for use in countless applications across widespread markets where hoses and fluid lines are connected and disconnected. View the wide variety of Parker couplings below, including hydraulic quick release couplings covering pressure ranges from 30 to 15,000 psi; general purpose pneumatic, quick couplers and nipples for fast connection under high or low pressure; and Pioneer hydraulic quick couplings and adapters.
Parker 60 Series Hydraulic Quick Release Coupling ISO 7241, Series B

Parker 60 Series Hydraulic Quick Release Coupling ISO 7241, Series B

Product Price: Rs 2,000 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/8,1/4,3/8,1/2,3/4,1,1 1/2,2 1/2 inch
VersionHydraulic Quick Release Coupling
Product TypeParker 60 Series Hydraulic Quick Release Coupling
PowerHydraulic Quick Release Coupling
Diameter1/8,1/4,3/8,1/2,3/4,1,1 1/2,2 1/2 inch
Model Name/NumberParker 60 Series Hydraulic Quick Release Coupling
Working PressureUp to 5000 psi Up to 345 bar
CustomisationNot Customised
Valve SizePoppet
Parker's general purpose quick couplers and nipples are versatile for use across a spectrum of applications where fluid, gas or steam lines require fast and easy connection and disconnection.

    60 Series Couplers (hydraulic, fluids, gas, steam) up to 5000 psi, connect with ISO 7241 series B, 60 Series Nipples.

    Parker's 60 Series have double shut-off poppet valves and are interchangeable with other quick disconnects complying with ISO 7241 series B.  

    These general purpose quick couplings are available in a wide range of sizes and materials to be versatile for use with several fluids, including high temperature steam. Parker's 60 Series is multi-purpose for a variety of applications  and pressures up to 5000 psi.

    Steam version couplers are brass with double interface O-rings and stainless steel locking balls. Seal material is Ethylene Propylene and the 3/8" size has a grip-ring sleeve for easy operation when wearing gloves.

    Technical Characteristics:
    • Sizes: 1/8” – 2-1/2”
    • Materials: Steel, Brass, 302 Stainless Steel, 316 Stainless Steel
    • Port Ends: Female NPTF, Female ORB
    • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene
    • Coupler options include: Sleeve Lock, Valve Actuator, Steam compatibility

    Markets:
    • Industrial
    • Construction
    • Chemical Processing
    • Commercial Cleaning
    • Agriculture

    Features/Benefits:
    • Globally interchangeable with other manufacturer's couplings complying to ISO 7241 series B
    • Multi-purpose coupling, widely used in varied applications
    • Steel couplers have a hardened sleeve for strength and durability
    • Metal valve stop prevents flow checking to provide steady performance
    • Steam version couplers have Ethylene Propylene seals to withstand high temperatures and the 3/8" has a grip-ring sleeve for easy operation when wearing gloves
    • Brass couplers have double O-rings for redundant sealing and stainless steel locking balls for corrosion resistance
    • 316 Stainless steel couplers have Fluorocarbon seals for chemical compatibility
    • Optional coupler sleeve lock helps to prevent accidental disconnection

    Applications:  
    • Industrial hydraulic lines
    • Food and chemical processing
    • Water and coolant lines
    • High pressure fluid transfer
    • High temperature fluid transfer
    • Mobile equipment
    • Cleaning equipment
    • Dry cleaning
    • Steam systems
Get Best QuoteRequest Callback
Parker 60 Series Quick Release Couplers

Parker 60 Series Quick Release Couplers

Product Price: Rs 2,500 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Usage/ApplicationHydraulic Pipe
MaterialSteel
Size1/8 to 2-1/2
VersionParker 60 series Quick Release coupling
Model Name/NumberParker Quick Release Coupling
Working Pressure5000 psi
ConnectionNPTF,BSPP
Fluid TypeHydraulic Oil
BrandParker
I Deal InNew Only
ValvingYes
Rated PressureUP to 5000 PSI
Temperature Range-40 Deg C To 250 Deg C
GradeSteel,Brass,stainless steel 303 & 316

Parker 60 Series couplings meet ISO 7241-1, Series B interchange and are used across a wide spectrum of hydraulic applications. These double shut-off couplings can be used anywhere that fluid transfer lines are regularly connected and disconnected, and where a minimum loss of fluid is desirable. The product is primarily used with hydraulic fluid; however, general purpose 60 Series couplings are also used with chemicals, water, steam, and gas transfer lines.

Features:

ISO 7241 Series B standard

Large flow areas machined into the body of the Parker 60 Series couplers and nipples facilitate flow around the valve, resulting in a high flow capacity.

The perch maintains valve alignment and provides positive metal to metal valve stop to ensure that the valves open fully, every time.

Captive valve seal assures “bubble tight” poppet sealing. The valve seal is positively captured by the metal poppet to minimize seal washout or damage by high velocity fluid.

Hardened nipples and sleeves (steel) and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock.

The seal is designed to withstand high pressures and provide reliable sealing. A wide selection of optional seal materials are available for 60 Series couplers and nipples.

Steel versions if 60 Series couplings feature PTFE back-up rings that support mating seals for high pressure applications. Brass couplers have a double O-ring seal for redundancy in low pressure, vacuum and steam applications.

Durable ball-locking mechanism assures reliable connection, every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life.

Parker 60 Series couplings are manufactured from brass, steel and stainless steel as standard materials. A wide range of seals allow these couplings to be used with a broad range of media.

Straight Thread (ORB) end configurations are available as standard.

Parker 60 Series couplings comply with ISO 7241, Series B Standard.


General purpose couplings are used across the spectrum of fluid system applications. Couplings can be found wherever fluid lines need to be connected or disconnected more efficiently, eliminating the need for additional tools to make the connection. Parker offers a broad range of coupling products for nearly every design requirement; including industrial, agricultural and mobile hydraulic systems. Couplings are available in steel, stainless steel, aluminum and other materials. Parker manufacturers the largest volume of quick coupling products in the industry and offers a wide variety of special port options and sealing materials for numerous applications.

Parker’s 60 Series couplings are geared toward low-cycle, low-impulse applications.
Typical applications include hydraulic jacks, mine roof support systems, and high-pressure fluid transfer, such as pumping water or slury in oil wells. Parker’s Quick Coupling division puts an extraordinary amount of resources and commitment into solution designs for OEMs like you. Sometimes the process is extremely simple. “Yes, we’ve seen something like that before. This off-the-shelf component does exactly what you need.” Other times, we perform modifications that enhance its function in a new application; but in either case, a proven Parker design has unparalleled cost-effective value.

Get Best QuoteRequest Callback
Parker\'s EA Series Multi-Purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas

Parker's EA Series Multi-Purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas

Product Price: Rs 5,500.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4,3/8,1/2,3/4 inch
Product TypeParker's EA Series Multi-purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas
VersionParker's EA Series Multi-purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas
ShapeParker's EA Series Multi-purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas
PowerHydraulic
Model Name/NumberParker's EA Series Multi-purpose Quick Release Coupling Vacuum & Medium Pressure Fluids & Gas
Surface FinishingZinc with clear trivalent chromate
Working PressureUp to 3000 psi Up to 207 bar
CustomisationNot Customised
Valve SizePoppet,No Valve
PlatingZinc with clear trivalent chromate
Connection1/4,3/8,1/2,3/4 inch
Temperature121 DegreeC 250 DegreeF
Fluid TypeHydraulic,general purpose,vacuum to medium pressure Vacuum and medium pressure hydraulics
I Deal InNew Only
ValvingYes
Parker's multi-purpose quick couplers and nipples are ideal for use in vacuum and medium pressure applications where fluid or gas lines require fast and easy connection and disconnection.

    EA  Series Nipples, (hydraulic, water, gas) vacuum up to 3,000 psi, connect with EA Series Couplers.
    Parker's EA Series are available as single shut-off, double shut-off, or unvalved straight through quick couplings specifically designed for vacuum and medium pressure applications. Dependable vacuum service down to 29.72" Hg. Couplers and nipples are available in a range of sizes and variety of materials including brass, steel and 316 stainless steel.

    Technical Characteristics:
    • Sizes: 1/4” - 3/4”
    • Materials: Steel, Brass, 316 Stainless Steel
    • Port Ends: Female NPTF, Male NPT
    • Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene
    • Other nipple options include: aluminum material, sizes up to 4", and additional port end configuration options

    Markets:
    • Industrial
    • Construction
    • Molding
    • Testing

    Features/Benefits:
    • Multi-purpose coupling with vacuum capability
    • Valved and unvalved configurations can be used in any combination to make a straight through, double shut off, or single shut off connection
    • Male and female port options

    Applications:  
    • Test lab equipment
    • Autoclave applications
    • Aircraft fabrication
    • Plastic molding
    • Horizontal boring and dewatering
    EA  Series Nipples, (hydraulic, water, gas) vacuum up to 3,000 psi, connect with EA Series Couplers.
    Parker's EA Series are available as single shut-off, double shut-off, or unvalved straight through quick couplings specifically designed for vacuum and medium pressure applications. Dependable vacuum service down to 29.72" Hg. Couplers and nipples are available in a range of sizes and variety of materials including brass, steel and 316 stainless steel.

    Technical Characteristics:
    • Sizes: 1/4” - 3/4”
    • Materials: Steel, Brass, 316 Stainless Steel
    • Port Ends: Female NPTF, Male NPT
    • Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene
    • Other nipple options include: aluminum material, sizes up to 4", and additional port end configuration options

    Markets:
    • Industrial
    • Construction
    • Molding
    • Testing

    Features/Benefits:
    • Multi-purpose coupling with vacuum capability
    • Valved and unvalved configurations can be used in any combination to make a straight through, double shut off, or single shut off connection
    • Male and female port options

    Applications:  
    • Test lab equipment
    • Autoclave applications
    • Aircraft fabrication
    • Plastic molding
    • Horizontal boring and dewatering
Get Best QuoteRequest Callback
Parker SM Series Hydraulic Quick Release Coupling

Parker SM Series Hydraulic Quick Release Coupling

Product Price: Rs 4,000.00 / UnitGet Best Price

Minimum Order Quantity: 25 Unit

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4,1/2,3/4 inch
Product TypeParker SM Series Hydraulic Quick Release Coupling
VersionParker SM Series Hydraulic Quick Release Coupling
ShapeParker SM Series Hydraulic Quick Release Coupling
PowerHYDRAULIC
Model Name/NumberParker SM Series Hydraulic Quick Release Coupling
CustomisationNot Customised
Working PressureUp to 6000 psi Up to 414 bar
PlatingZinc with clear trivalent chromate
Flow Rate3 to 28 Gal/min
ConnectionNPTF,BSPP,NPTF,ORB
Temperature121 DegreeC 250 DegreeF
I Deal InNew Only
ValvingYes
Parker's general purpose quick couplers and nipples are ideal for use in hydraulic applications where fluid lines require fast and easy connection and disconnection.

    SM Series Couplers (hydraulic) up to 6000 psi connect with SM Series Nipples. Parker's SM Series are double shut-off quick couplings with manual sleeves and poppet valves. Female port end options include NPTF, O-ring Boss, and BSPP styles.

    Technical Characteristics:
    • Sizes: 1/4” – 3/4”
    • Material: Steel
    • Port Ends: Female NPTF, Female ORB, Female BSPP
    • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene
    • Other Coupler options include: Sleeve Lock

    Markets:
    • Industrial
    • Construction
    • Agriculture

    Features/Benefits:
    • Poppet valves have captive seals to minimize seal washout
    • Standard end configurations include Female NPTF, Female ORB, Female BSPP

     These Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. Designed for use with commercial grades of hydraulic fluids. These couplings are ideally suited for all mobile or industrial applications.

    Protective dust plugs and caps play a crucial role in the life of a quick coupling and in protecting hydraulic system components from contamination. Don't forget to order an appropriate dust plug and cap with your quick disconnects.

Get Best QuoteRequest Callback
Parker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile

Parker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile

Product Price: Rs 6,000 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
VersionParker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile
Product TypeParker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile
ShapeParker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile
PowerHydraulic
Model Name/NumberParker HP Series High Pressure Hydraulic Quick Coupling with Parker Profile
CustomisationNot Customised
Working Pressure5000 psi 345 bar
Valve SizePoppet,Mannual Sleeve
PlatingZinc with clear trivalent chromate
Flow RateUp to 100 Gal/min
ConnectionNPSF,ORB,NPTF
Temperature121 DegreeC 250 DegreeF
Fluid TypeOil
I Deal InNew Only
ValvingYes
    HP Series Couplers (hydraulic) 5000 psi connect with HP Series Nipples.
    Parker's HP Series are double shut-off quick couplings with manual sleeves and poppet valves. Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges. End fitting configurations include female pipe and straight thread ORB.

    Technical Characteristics:
    • Sizes: 1” and 1-1/2””
    • Material: Steel
    • Port Ends: Female NPSF, Female ORB, Female NPTF
    • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

    Markets:  
    • Industrial
    • Construction
    • Mobile Equipment

    Features/Benefits:  
    • Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges
    • High flow with minimal pressure drop

    Applications:  
    • Industrial hydraulic lines
    • Construction mobile equipment
Get Best QuoteRequest Callback
Parker 4000 Series Agricultural Hydraulic Quick Release Coupling

Parker 4000 Series Agricultural Hydraulic Quick Release Coupling

Product Price: Rs 3,500.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4,3/8,1/2,3/4,1 inch
VersionParker 4000 Series Agricultural Hydraulic Quick Release Coupling
Product TypeParker 4000 Series Agricultural Hydraulic Quick Release Coupling
ShapeParker 4000 Series Agricultural Hydraulic Quick Release Coupling
PowerHydraulic
Model Name/NumberParker 4000 Series Agricultural Hydraulic Quick Release Coupling
CustomisationCustomised
Working Pressure3000 psi 207 bar
Valve Size3000 psi 207 bar
PlatingZinc with clear trivalent chromate
Flow Rate3 to 50 Gal/min
Temperature250 DegreeF 121 DegreeC Up to 250 DegreeF
ConnectionBSP,NPTF
Fluid TypeOil
I Deal InNew Only
ValvingYes
Parker's agricultural quick couplers and nipples are the farmers choice where fluid lines require fast and easy connection and disconnection.

    4000 Series Couplers (hydraulic) 3000 psi, connect with 4000 Series Nipples and 1/2"" 8010 Series Nipples (ISO 5675, Pioneer male tips).
    Parker's 4000 Series are double shut-off quick couplings with poppet or ball valve options. Couplers have a manual sleeve. Push-pull breakaway sleeve is only available on 1/4" body size with 9/16 - 18 ORB thread, part number 4050P-T6.

    Technical Characteristics:
    • Sizes: 1/4” – 1”
    • Material: Steel
    • Port Ends: Female NPTF, Female ORB, Male ORB (1/4" size), Female BSPP
    • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

    Markets:
    • Agriculture
    • Mobile Equipment
    • Construction
    • Snow removal

    Features/Benefits:
    • Proven design for rugged applications
    • Poppet or ball valve option
    • Critical parts are hardened for durability
    • 1/2" size globally connects with Pioneer universal male tips (nipples) complying to ISO 5675

    Applications:  
    • Tractors and agricultural equipment
    • Hydraulic loaders
    • Add-on hydraulic circuits
    • Hydraulic tools
    • Snow plow attachments
Get Best QuoteRequest Callback
Parker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type

Parker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type

Product Price: Rs 6,500.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size3/8,1/2,3/4,1 inch
Product TypeParker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type
VersionParker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type
ShapeParker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type
PowerNON SPILL HYDRAULIC
Model Name/NumberParker NS Series Non-Spill Hydraulic Quick Release Coupling Push-to-Connect Flat Face Type
Working Pressure2500 psi 172 bar
CustomisationNot Customised
Valve SizeNon-spill
Flow Rate50 Gal/min
Temperature121 DegreeC 250 DegreeF
ConnectionNPSF,BSPP,UNF,UN,NSPF
Fluid TypeOil
I Deal InNew Only
ValvingYes
Parker's non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion

    NS Series Couplers (hydraulic) up to 2500 psi connect with NS Series Nipples.
    Parker's NS Series are double shut-off non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting. Couper has a heavy duty sleeve to withstand pressure surges. Positive valve stop prevents flow checking.

    Technical Characteristics:
    • Sizes: 3/8” – 1”
    • Materials: Steel
    • Port Ends: Female NPSF, Female BSPP, Female ORB
    • Seal Options: Nitrile, EPR, Fluorocarbon

    Markets:
    • Industrial
    • Construction
    • Utility
    • Mining

    Features/Benefits:
    • Push-to-connect operation makes connection easy with one hand
    • Locking sleeve helps to prevent accidental disconnection
    • Heavy duty coupler sleeve for increased durability
    • Non-spill valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Non-spill valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
    • Positive valve stop prevents flow checking for smooth performance

    Applications:  
    • Hydraulic hand tools
    • Utility equipment
    • Mining Equipment
Get Best QuoteRequest Callback
Parker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Parker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Product Price: Rs 7,500.00 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4,3/8,1/2,3/4,1 inch 1/4 to 1 inch
Product TypeParker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
VersionParker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
ShapeParker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
PowerHydraulic
Model Name/NumberParker FF / FC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
Working PressureUp to 5000 psi Up to 345 bar
CustomisationNot Customised
Flow Rate50 gal/min
Temperature121 DegreeC 250 DegreeF
ConnectionNPSF,NPTF,UNF,BSPP
Fluid Typeoil
I Deal InNew Only
ValvingYes
Parker's non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion.

    FF Series Couplers (hydraulic) up to 5000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards in the 3/8" size, and connect with FF/FC Series Nipples. FC Nipples provide the ability to connect under pressure.
    Parker's FF Series are double shut, off non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting. Couplers have a sleeve locking mechanism to help prevent accidental disconnection. Couplers and nipples are available in a range of sizes to be versatile for use in applications with pressures up to 5000 psi.

    Technical Characteristics:
    • Sizes: 1/4” – 1”
    • Material: Steel
    • Port Ends: Female NPSF, Female NPTF, Female UNF, Female BSPP
    • Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

    Markets:
    • Industrial
    • Construction
    • Utility
    • Agriculture

    Features/Benefits:
    • Push-to-connect operation makes connection easy with one hand
    • 3/8" size is globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
    • Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
    • Sleeve lock guards against accidental disconnection

    Applications:
    • Hydraulic tools
    • Constuction equipment attachments
    • Industrial hydraulic lines
    • Agricultural implements
    • Coolant fill and drain lines
Get Best QuoteRequest Callback
Parker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Parker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Product Price: Rs 8,500.00 / UnitGet Best Price

Minimum Order Quantity: 50 Unit

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4,3/8,1/2,5/8,3/4,1 inch
VersionParker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
Product TypeParker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
ShapeParker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
PowerHydraulic
Model Name/NumberParker FEM / FEC Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
CustomisationNot Customised
Working PressureUp to 4568 psi 315 bar
PlatingZinc with clear trivalent chromate
Flow RateUp to 50 Gal/min
Temperature121 DegreeC 250 DegreeF
ConnectionBSPP,NPTF
Fluid TypeOIL
I Deal InNew Only
ValvingYes
Parker's non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion

    FEM Series Couplers (hydraulic) up to 4568 psi, meet or exceed design and performance requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards and connect with FEM/FEC Series Nipples. FEC Nipples provide the ability to connect under pressure.
    Parker's FEM Series are double shut off, non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting and are interchangeable with other products complying with HTMA - ISO 16028. FEM Couplers and nipples are available in a range of sizes as well as male and female fitting ends to be versatile for use in applications with pressures up to 4568 psi.

    Technical Characteristics:
    • Sizes: 1/4” – 1”
    • Material: Steel
    • Port Ends: Female NPSF, Female ORB, Male Bulkhead Flare, Male Bulkhead Face Seal
    • Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

    Markets:
    • Industrial
    • Construction
    • Utility
    • Agriculture

    Features/Benefits:
    • Push-to-connect operation makes connection easy with one hand
    • All sizes are globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
    • Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
    • Optional sleeve lock guards against accidental disconnection

    Applications:
    • Skid loader attachments
    • Hydraulic tools
    • Constuction equipment attachments
    • Industrial hydraulic lines
    • Agricultural implements
    • Coolant fill and drain lines
Get Best QuoteRequest Callback
Parker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Parker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Product Price: Rs 15,000.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialStainless Steel
Thread Size1/4,3/8,1/2,3/4,1 inch
Product TypeParker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
VersionParker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
ShapeParker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
PowerHYDRAULIC,PNEUMATICS
Model Name/NumberParker FS Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
CustomisationCustomised
Working Pressure2000 psi 138 bar
Flow Rate3 to 50 Gal/min
Temperature204 DegreeC 400 DegreeF
ConnectionBSPP,NPTF
Fluid TypeHydraulic
I Deal InNew Only
ValvingYes
Parker's stainless steel non-spill quick couplers and nipples are ideal for use in applications where chemical or corrosive fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion.

    FS Series Couplers (2000 psi), connect with FS Series Nipples.
    Parker's FS Series are stainless steel non-spill quick couplings with flush face valves designed to minimize spillage and air inclusion when connecting or disconnecting to result in minimal environmental contamination. These quick couplings are ideal for closed system transfer and dispensing of chemicals and other fluids. FS Couplers and nipples are available in a range of sizes.

    Technical Characteristics:
    • Sizes: 1/4” – 1”
    • Materials: 316 Stainless Steel
    • Port Ends: Male NPT, Female NPTF, Female UNF
    • Seal Options: Fluorocarbon, Ethylene Propylene, Neoprene

    Markets:
    • Chemical processing and handling
    • Food processing
    • Corrosive fluid handling
    • Agriculture

    Features/Benefits:
    • Push-to-connect operation makes connection easy with one hand
    • Corrosion resistant 316 stainless steel material
    • Fluorocarbon seals are compatible with many chemicals
    • Non-spill valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

    Applications:  
    • Chemical dispensing systems
    • Chemical processing
    • Food processing
    • Corrosive media transfer
Get Best QuoteRequest Callback
Parker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Parker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Product Price: Rs 9,500.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size3/8
VersionParker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
Product TypeParker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
ShapeParker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
PowerHYDRAULIC
Model Name/NumberParker FH Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
CustomisationNot Customised
Working Pressure10000 psi 689 bar
Parker's high pressure non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion.

    H Series Couplers (hydraulic) 10,000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA) standards, and connect only with FH Series Nipples. Parker's FH Series are high pressure non-spill quick couplings that will not connect with lower pressure quick couplings. The red color makes these couplings easy to identify as high pressure (10,000 psi). The coupler sleeve lock feature guards against accidental disconnection. Couplers and nipples are available in 3/8" size only.

    Technical Characteristics:
    • Size: 3/8"
    • Material: Steel
    • Port Ends: Female NPTF, Female BSPP
    • Seal Options: Nitrile, EPR, Fluorocarbon

    Markets:
    • Rescue
    • Industrial
    • Construction
    • Utility

    Features/Benefits:
    • Push-to-connect operation makes connection easy with one hand
    • Meets HTMA (ISO 16028) standards but will NOT connect with lower pressure flush face couplings
    • Red color finish makes it easy to visually identify as a high pressure connection
    • Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
    • Sleeve lock guards against accidental disconnection

    Applications:  
    • Hydraulic crimpers, cutters, benders, clamps, wedges
    • Rescue equipment
    • High pressure test equipment
    • High pressure hydraulic equipment
Get Best QuoteRequest Callback
Parker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Parker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect

Product Price: Rs 15,000.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER SNAPTITE
MaterialMild Steel
VersionParker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
Product TypeParker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
ShapeParker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
PowerHYDRAULIC
Model Name/NumberParker Snap-tite 71 Series Non-Spill Flush Face Hydraulic Quick Release Coupling Push-To-Connect
CustomisationCustomised
Working Pressure10000 PSI
ConnectionHYDRAULIC NON SPILL
Temperature250 DegreeF
Fluid TypeHYDRAULIC OIL
Packaging TypeZinc with clear trivalent chromate
I Deal InNew Only
ValvingYes
    Snap-tite 71 Series Nipples (hydraulic) up to 10,000 psi connect with Snap-tite 71 Series Couplers.
    These are double shut-off, non-spill, push to connect quick couplings for high pressure applications. Couplers and nipples  are available in a wide range of sizes up to 2 inch with material options including steel, 316 stainless steel, or high pressure stainless steel.

    Note: The 71-3 style couplers and nipples are interchangeable with the previous Snap-tite design couplers and nipples in sizes 3/8", 1/2", and 3/4". Old style 1" couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design.

    Technical Characteristics:
    • Sizes: 1/4” – 2”
    • Materials: Steel, 316 Stainless Steel, High Pressure Stainless Steel
    • Port Ends: Female NPTF, Female SAE
    • Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

    Markets:
    • Industrial
    • Oil and Gas
    • Construction

    Features/Benefits:
    • Push-to-connect operation makes connection easy
    • Corrosion resistant 316 stainless steel and high pressure stainless steel material options for demanding applications
    • Non-spill valves minimize fluid loss when disconnecting to reduce environmental contamination and avoid safety hazards caused by spillage.
    • Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

    Applications:  
    • In-plant equipment
    • Oil exploration and production
    • Construction Equipment
Get Best QuoteRequest Callback
Parker 3000 Series Hydraulic Jack Quick Release Coupling Thread to Connect

Parker 3000 Series Hydraulic Jack Quick Release Coupling Thread to Connect

Product Price: Rs 3,000 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size1/4 TO 3/8
Product TypeParker 3000 Series Hydraulic Jack Quick Release Coupling Thread to Connect
VersionParker 3000 Series Hydraulic Jack Quick Release Coupling Thread to Connect
ShapeParker 3000 Series Hydraulic Jack Quick Release Coupling Thread to Connect
PowerHYDRAULIC
Working Pressure10000 psi 689 bar
CustomisationNot Customised
PlatingZinc with clear trivalent chromate
Flow Rate3 to 6 Gal/min
Temperature110 DegreeC 230 DegreeF
ConnectionNPTF
Fluid TypeOIL
I Deal InNew Only
ValvingYes
Parker's high pressure, thread to connect quick couplers and nipples are ideal for fast and easy connection and disconnection of hydraulic hand tools to fluid lines.

    3000 Series Couplers (hydraulic) 10,000 psi, connect with 3000 Series Nipples.
    These rugged thread to connect, high pressure quick couplings are manually threaded together to open the ball valves and make the connection. The durable coupler interface seal is polyurethane.

    Technical Characteristics:
    • Sizes: 1/4” & 3/8”
    • Material: Steel
    • Port Ends: Female NPTF, Male NPTF
    • Seal: Polyurethane

    Markets:
    • Rescue Equipment
    • Construction

    Features/Benefits:
    • Rugged and secure threaded connection interchanges with similar hand tool couplings
    • Hard chrome alloy ball valves
    • Polyurethane seal resists against high pressure extrusion
    • Positive valve stop prevents flow checking for a smooth performance

    Applications:
    • High pressure rescue tools  
    • Hydraulic rams
    • Portable hydraulic hand tools
    • Crimping equipment
Get Best QuoteRequest Callback
Parker TC Series Hydraulic Jack Quick Release Coupling With Sleeve Lock

Parker TC Series Hydraulic Jack Quick Release Coupling With Sleeve Lock

Product Price: Rs 6,200.00 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialMild Steel
Thread Size3/8
Product TypeParker TC Series Hydraulic Jack Quick Release Coupling With Sleeve Lock Railway Jack
VersionParker TC Series Hydraulic Jack Quick Release Coupling With Sleeve Lock
ShapeParker TC Series Hydraulic Jack Quick Release Coupling With Sleeve Lock
PowerHYDRAULIC JACK
Model Name/NumberTC-371 & TC-372
Working Pressure10000 PSI
Valve SizePoppet Type
PlatingZinc with clear trivalent chromate
Flow Rate6 Gal/min
ConnectionNPSF female
Temperature-15 to 400 DegreeF
Fluid Typeoil
I Deal InNew Only
ValvingYes
    TC Series Couplers (hydraulic) up to 10,000 psi connect with TC Series Nipples.
    Parker's TC Series are double shut-off, high pressure quick couplings designed for applications with hydraulic and mechanical shock. Couplers have a sleeve lock function to guard against accidental disconnection. Couplers and nipples are available in 3/8" size with a pressure rating of 10,000 psi.

    Technical Characteristics:
    • Size: 3/8”
    • Material: Steel
    • Port Ends: Female NPSF
    • Seal: Fluorocarbon

    Markets:  
    • Railway
    • Construction
    • Building relocation
    • Structure lifting

    Features/Benefits:
    • Sleeve lock guards against accidental disconnection
    • Positive valve stop prevents flow checking for reliable performance under hydraulic shock
    • Durable Fluorocarbon seals

    Applications:  
    • Any application with hydraulic and mechanical shock
    • Hydraulic jacking and house moving equipment
    • Construction equipment
    • Railway maintenance
Get Best QuoteRequest Callback
Parker\'s 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore

Parker's 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore

Product Price: Rs 35,000 / NumberGet Best Price

Minimum Order Quantity: 50 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER
MaterialStainless Steel
Thread Size1/4
VersionParker's 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore
Product TypeParker's 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore
ShapeParker's 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore
PowerHYDRAULIC OIL
Model Name/NumberParker's 1141 Series Hydraulic Quick Release Coupling Thread To Connect Off shore
Working Pressure10000 PSI
CustomisationNot Customised
Plating303 Stainless steel
Flow Rate3 Gal/min
ConnectionNPTF
Temperature180 DegreeF
Fluid TypeOIL
I Deal InNew Only
ValvingYes
    1141 Series Nipples (hydraulic) 10,000 psi, connect with 1141 Series Couplers.
    Parker's 1141 Series have stainless steel bodies and brass sleeves. They are high pressure, thread to connect quick couplings with polyethylene seals that resist extrusion and abrasion. Couplers and nipples are available in 1/4" size and have dust caps and plugs included.

    Technical Characteristics:
    • Size: 1/4”
    • Material: 303 Stainless Steel
    • Port Ends: Female NPTF
    • Seal Material: Polyurethane

    Markets:
    • Oil and Gas

    Features/Benefits:
    • Rated pressure up to 10,000 psi and 17,000 psi intermittent pressure
    • Small diameter mating seal keeps separation forces to a minimum, allowing easier threaded connection and disconnection at pressures up to 5000 psi
    • Polyurethane seals resist extrusion and abrasion
    • Threaded connection guards against accidental disconnection
    • When fully coupled, sleeve covers the mating thread to visually confirm a complete connection
    • Attached protective caps are included

    Applications:  
    • Off shore oil equipment
    • Pilot lines
    • Test port access
    • Hydraulic lines in corrosive environments
Get Best QuoteRequest Callback
Tema High Pressure Quick Release Coupling
  • Tema High Pressure Quick Release Coupling
  • Tema High Pressure Quick Release Coupling

Tema High Pressure Quick Release Coupling

Product Price: Rs 1,000 / UnitGet Best Price

Product Brochure

Product Details:
BrandTema
MaterialBrass
ApplicationStructure Pipe, Hydraulic Pipe
Size1/2 inch, 3/4 inch
Surface FinishingPolished
Packaging TypeBox
The Parker RectusTema standard catalogue range offers the right coupling for most application areas. Many of these standard items come from previous special solutions which we later integrated into serial production. Developing special solutions for particular tasks is one of our strengths – and an advantage which you can use at any time. Our competent specialists will be pleased to visit you to establish your specific requirements and wishes. We will then recommend adaptation of one of our standard products, or new design of a bespoke individual solution for you. At the end, we will provide you with a functional system that is exactly suited to your requirements – both technologically and economically. Get in touch – we will be pleased to advise you specifically. 


ISO A Profile, 6600 Series, Parker Rectus Tema ... ISO B Profile, 70 Series Ultra-Flo, Parker Rectus Tema ... Flat Face Series TIF2500, Parker Rectus Tema.

Specifications:
Temperature range (°C): -20 to +100, standard seal NBR
Maximum static working pressure (bar/psi): PB 35/500

Material:
Brass nickel plated
Buna seal (standard series coupling)

Application:
General purpose pneumatic coupling, medical, dental, robotics and instrumentation

 coupling systems and accessories for the pressures up to 1500 bar. Tema products prove their reliability every day in a wide variety of industrial applications - for water, oil, and other liquid and gaseous media

With their many innovative design variants, Tema quick connect couplings are among the best hydraulic connection elements in the world. What makes them especially brilliant is the negligible drop in pressure and maximum power transition

The development of the single-hand quick connect coupling made a decisive contribution to improving work safety and functionality. In order to create a connection, the plug is simply pushed into the coupling. This causes the sleeve to spring forward and lock automatically. When uncoupling, the sleeve is pushed back with one hand and the disconnection is easy. The following valve designs are available for selection for different applications:

 

Get Best QuoteRequest Callback
Parker Snaptite NGV and CNG Fueling Nozzles,Breakaway - Vent Line

Parker Snaptite NGV and CNG Fueling Nozzles,Breakaway - Vent Line

Product Price: Rs 25,000.00 / UnitGet Best Price

Minimum Order Quantity: 500 Unit

Product Brochure

Product Details:
MaterialStainless Steel
Usage/ApplicationFuel Dispensing
Size1/4
Thread Size1/4
Temperature-40 DegreeF to +150 DegreeF (-40 DegreeC to +65 DegreeC)
Model Name/NumberNGVBCN2-VL,NGVBCN2-P50
Working Pressure3600 psi
Fluid TypeCNG GAS
Overall Dimension3.73" (94.7 mm)
BrandSNAPTITE PARKER
Parker’s vent line breakaway provides an important safety feature for CNG dispensing systems. It allows the vent line hose to safely disconnect, preventing damage to the dispenser in the event of a "drive off" and allows any CNG remaining in the vent line to bleed off safely.

Features:
•  Reliable consistent performance
•  Compact size
•  Reusable following breakaway (with minimal inspection)
Get Best QuoteRequest Callback
Parker Stainless Steel Quick Release Coupling

Parker Stainless Steel Quick Release Coupling

Product Price: Rs 5,000 / UnitGet Best Price

Minimum Order Quantity: 5 Unit

Product Details:
BrandParker
MaterialStainless Steel
ApplicationStructure Pipe, Hydraulic Pipe, Gas Pipe
Size3/4 inch, 1 inch, 2 inch, 1/2 inch
ShapeRound
Working Pressure20.7~34.5 MPa
Parker QRC quality with superior pressure and flow characteristics over the competition:
  • Interchangeable with Aeroquip FD42 and Parker 4000 Series
  • 4:1 Safety factor
  • Proven ball-lock mechanism provides positive connection
  • Poppet style shut-off
  • High strength steel construction
  • Zinc Trivalent Chromate plating for corrosion resistance
  • Choice of seal materials to handle a variety of fluids
  • Sizes 1/4" & 3/8"=Conforms with ROHS and WEEE European Union Directives demanding hydraulic applications. 

Typical applications include snow plows, agricultural equipment and construction equipment. The 60 Series will interchange with Aeroquip’s FD42 Series and Parker’s 4000 Series. The 60 Series coupler is provided with a retaining groove for bulkhead mounting. The poppet style valve design provides excellent sealing in both high and low pressure applications. The60 Series offers up to 3000 psi (210 bar) operating pressure in both the connected and disconnected positions.
Get Best QuoteRequest Callback
Tema Hydraulic Quick Release Coupling

Tema Hydraulic Quick Release Coupling

Product Price: Rs 3,500 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
Size1/2 inch
Working PressureUP to 350 bar
MaterialBrass
ApplicationHydraulic Pipe
BrandParker
Rotation Speed60 r.p.m

Hydraulic Hand Tool, Thread To Connect Interchange, High Pressure Quick Couplings 10,000 Psi - 3000 Series Nipples Parker's high pressure, thread to connect quick couplers and nipples are ideal for fast and easy connection and disconnection of hydraulic hand tools to fluid lines.High Pressure Stainless, Non-Spill Quick Couplings, Sizes To 2 Inch, (Hydraulic) Up To 10,000 Psi - Snap-Tite 71 Series Couplers

 

Parker's high pressure stainless steel, non-spill quick couplers and nipples are available in a wide range of sizes for use in hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage.High Pressure Stainless, Non-Spill Quick Couplings, Sizes To 2 Inch, (Hydraulic) Up To 10,000 Psi - Snap-Tite 71 Series Nipples

 

Parker's high pressure stainless steel, non-spill quick couplers and nipples are available in a wide range of sizes for use in hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage.ISO 7241 Series B Interchange, Multi-Purpose Quick Couplings (Hydraulic, Fluids, Gas, Steam) Up To 5000 Psi - 60 Series Couplers

 

Parker's general purpose quick couplers and nipples are versatile for use across a spectrum of applications where fluid, gas or steam lines require fast and easy connection and disconnection.Thread To Connect Interchange, Non-Spill, Heavy Duty, High Pressure Quick Couplings (Hyd) Up To 6000 Psi - FET Series Couplers

 

Parker's thread to connect interchange, non-spill, connect under pressure couplers and nipples are heavy duty for use in high pressure, high impulse hydraulic applications where fluid lines require connection with similar couplings.Hydraulic Flat Face Quick Coupling With ISO 16028 Profile, Series FEM / IF

 

Flat Face quick coupling system with body size 1/8" up to 1" for medium pressure applications up to 450 bar. Coupling system with ISO 16028 Profile.Hydraulic Quick Coupling With ISO A Profile, Series 5500

 

Quick coupling system with body size 1/2" for medium pressure applications up to 250 bar. Coupling system with ISO A Profile.Hydraulic Quick Coupling With ISO B Profile, Series IB Quick coupling system with body size 1/4" up to 1" for medium pressure applications up to 400 bar. Coupling system with ISO 7241-1 Series B profile.Hydraulic Quick Coupling With Parker Profile, Series T Hydraulic quick coupling system with body size 1/8" up to 2" for medium pressure applications up to 450 bar. Coupling with Parker Profile.Hydraulic Accessories Swivel Joints, Series DG/KR

 

 



Additional Information:

  • Port of Dispatch: DELHI
  • Delivery Time: 6-8 WEEK
Get Best QuoteRequest Callback
Parker 6600 Series Hydraulic Quick Release Coupling ISO 7241 series A Interchange

Parker 6600 Series Hydraulic Quick Release Coupling ISO 7241 series A Interchange

Product Price: Rs 2,000 / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Details:
Usage/ApplicationHydraulic Pipe
BrandParker
MaterialSteel
Thread Size1/4 to 1 inch
ApplicationHydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections
Size1 inch, 1/2 inch
VersionParker 6600 Series Hydraulic Quick Release Coupling
Product TypePoppet,Manual sleeve
ShapeHydraulic Quick Release Coupling
PowerHydraulic Quick Release Coupling
Diameter1/4 to 1
Model Name/NumberParker 6600 Series Hydraulic Quick Release Coupling
Working PressureUp to 5000 psi Up to 345 bar
CustomisationNot Customised
Temperature Range-40 to +250 deg F
6600 Series General Purpose Parker Quick Couplings:
Parker 6600 Series couplers meet the ISO 7241-1, Series A interchange and offer a double shut-off solution for higher pressure general purpose applications. The sleeve and nipple body are hardened to resist damage from brinelling and mechanical shock. The 6600 Series’ rugged construction makes this product a great choice for a wide range of applications.

Features:
  • ISO 7241-1 Series A standard ,
  • Steel construction 
  • Standard seal material is nitrile
  • Port configurations: NPTF & SAE ORB
  • Poppet valves are mated with a solid metal perch that maintains valve alignment and prevents flow checking.
  • Both the coupler's sleeve and the nipple's body are hardened to make the 6600 Series couplings resistant to damage from brinelling and mechanical shock.
  • The durable-ball-locking mechanism ensures a reliable connection every time.
  • 6600 Series couplings have female pipe and straight thread end configurations as standard.
  • Parker 6600 Series couplings interchange with couplings meeting ISO 7241-1, Series A.

Parker 6600 Series couplings are very versatile and are used in a wide range of hydraulic applications including construction equipment, manufacturing machinery, and in-plant systems. They can be found anywhere the fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment. Rugged construction makes the Parker 6600 Series couplings a good choice for mobile applications including dump trucks, snow plows, refuse hauling, mining, asphalt paving, truck trailer connections and many more. In-plant machinery applications include hydraulic fluid, chemicals and gas lines for paper mills, steel production, and many varieties of plant maintenance and production equipment.


    Technical Characteristics:
    • Sizes: 1/4” – 1”
    • Materials: Steel
    • Port Ends: Female NPTF, Female ORB
    • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene
    • Other Coupler options include: Sleeve Lock

    Markets:
    • Construction
    • Mobile equipment
    • Agriculture

    Features/Benefits:
    • Globally interchangeable with other manufacturer's quick couplings complying to ISO 7241 series A
    • Steel coupler sleeve is hardened for durability
    • Optional sleeve lock helps to prevent accidental disconnection

    Applications:
    • Hydraulic fluid transfer
    • Truck trailer connections
    • Mobile applications
    • Attachments
Get Best QuoteRequest Callback
Parker Quick Release Coupling

Parker Quick Release Coupling

Product Price: Rs 2,000 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
BrandParker
Size3 inch
ApplicationHydraulic Pipe
MaterialBrass
Packaging TypeBox
Head CodeRound

Parker Quick Coupling Division offers a wide spectrum of products to fit the demands of applications across a host of markets. There are Quick Couplings for virtually any application where hoses or implements require connection without the use of tools. Swivels allow hydraulic hoses to turn without twisting and binding. Sophisticated SensoControl® Diagnostic Equipment detects even the slightest variances when troubleshooting or proving your system. Thermoplastic Quick Couplings are compatible with many chemicals used in both agricultural and industrial applications.Premium Plus Safety Quick Coupling With A Self-Venting System, Series 1700 Premium plus self-venting quick coupling system with nominal pneumatic applications up to 12 bar.Coupling system with European standard profile. Available made of brass/steel. Premium Plus Safety Quick Coupling With A Self-Venting System, Series 1600 Premium plus self-venting quick coupling system with nominal diameter 7.8 for pneumatic applications up to 12 bar. Coupling system with European standard profile. Available made of brass/steel.


Quick Coupling With Japanese Industrial Profile, Series 13 Quick coupling system with nominal diameter 7.5 for pneumatic and fluid handling applications up to 35 bar. Coupling system with Japanese industrial profile. Available made of brass.Quick Coupling With A Worldwide Used Profile, Series 21 Quick coupling system with nominal diameter 5 for pneumatic and fluid handling applications up to 35 bar. Coupling system with the world's most popular profile in this nominal diameter. Available made of brass or stainless steel. Premium Safety Quick Coupling With Parker Profile And Additional Safety Locking, Series 25 Premium safety quick coupling system with nominal diameter 7.8 for pneumatic and fluid handling applications in the rescue market up to 35 bar. Coupling system with Parker profile.


Available made of brass/steel Chemical Compatible 316 Stainless Steel, Non-Spill Quick Couplings (2000 Psi) - FS Series Couplers Parker's stainless steel non-spill quick couplers and nipples are ideal for use in applications where chemical or corrosive fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion. Chemical Compatible 316 Stainless Steel, Non-Spill Quick Couplings (2000 Psi) - FS Series Nipples Parker's stainless steel non-spill quick couplers and nipples are ideal for use in applications where chemical or corrosive fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion.


ISO 7241 Series B Interchange, Multi-Purpose Quick Couplings (Hydraulic, Fluids, Gas, Steam) Up To 5000 Psi - 60 Series Couplers Parker's general purpose quick couplers and nipples are versatile for use across a spectrum of applications where fluid, gas or steam lines require fast and easy connection and disconnection. Automotive Air Hose And Tool Quick Couplings (Pneumatic, Air) Tru-Flate Interchange - 10 Series Couplers Parker's general purpose pneumatic, air quick couplers and nipples are ideal for use across a spectrum of applications where low pressure air or fluid lines require fast and easy connection and disconnection. ISO 7241 Series A Interchange, Steel Quick Couplings (Hydraulic) Up To 5000 Psi - 6600 Series Couplers Parker's hydraulic quick couplers and nipples are ideal for use in applications where fluid lines require fast and easy connection and disconnection.



Additional Information:

  • Port of Dispatch: DELHI
  • Production Capacity: 100
  • Delivery Time: READY
Get Best QuoteRequest Callback
Parker Snap-tite Hydraulic Quick Release Couplings H & PH Series Design Manual Sleeve

Parker Snap-tite Hydraulic Quick Release Couplings H & PH Series Design Manual Sleeve

Product Price: Rs 7,150 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
Usage/ApplicationHydraulic Pipe
BrandPARKER SNAPTITE
MaterialMild Steel
ApplicationChemical Fertilizer Pipe, Gas Pipe, Pneumatic Connections, Hydraulic Pipe
Size1/2 inch, 1 inch, 3/4 inch
Thread SizeSizes 1/4" - 4"
VersionParker Snap-tite Hydraulic Quick Release Couplings
Product TypeParker Snap-tite Hydraulic Quick Release Couplings
PowerParker Snap-tite Hydraulic Quick Release Couplings
Model Name/NumberParker Snap-tite Quick Release Couplings H & PH Series Design Manual Sleeve,Valved or Unvalved
CustomisationNot Customised
Working Pressure5000 psi
Flow Rate45 l/min
Packaging TypeBox
I Deal InNew Only
ValvingYes
Rated PressureUP to 5000 PSI
Tolerance+/-0.01 mm
Snap-tite H Series couplings have been proven by years of use on hydraulic applications. H Series is best suited for general purpose fluid applications where either single or double shut-off valving is desired. A wide range of sizes, materials and end configurations are available. PH version couplers and nipples are valved with a connectunder-pressure feature. These steel couplers and nipples allow connection with H Series valved couplers and nipples when there is a residual pressure on the PH coupler/nipple side. It is recommended that only one half of the connection (coupler or nipple) be PH version, not both.


    These steel couplers and nipples allow coFEATURES
    • Construction - Available in brass, aluminum, plated steel and 316 stainless steel

    • Sizes - 1/8" thru 4"

    • Seal Versatility - Wide choice of standard and special seal materials for a wide variety of media

    • Positive Sealing when Connected - Two sealing methods available based on application parameters

    • Dependable Operation - Ball locking mechanism for positive connection

    • Low Pressure Drop - Valve design and positive valve positioning maintain clean linear flow

    • Valve Configurations - Available with double or single shut-off valving or straight through

    • Pressure Ratings - For use in working pressures to 11,000 psi (759 bar)

    • End Fitting Versatility - Two piece body construction allows for many end fitting options
    nnection with H Series valved couplers and nipples when there is a residual pressure on the PH coupler/nipple side. It is recommended that only one half of the connection (coupler or nipple) be PH version, not both.

    Features:

    Sizes 1/4” - 4”. Available in steel, brass, aluminum and 316 stainless steel. Standard seal material is nitrile with other options available.
    Optional sleeve lock helps to prevent accidental disconnection. Double-shut-off version has low pressure drop. Manually operated sleeve provides secure connection.

    Applications include

    general hydraulic systems, plastic molding, machine tool, test equipment, agricultural, Departments of Transportation, and other mobile hydraulics. The IH option is available for reciprocating, pulsating and rotary motion air tools while the PH option is available for connection against static hydraulic pressure.
    Get Best QuoteRequest Callback
    Snaptite Quick Release Coupling

    Snaptite Quick Release Coupling

    Product Price: Rs 11,000 / NumberGet Best Price

    Minimum Order Quantity: 10 Number

    Product Brochure

    Product Details:
    BrandPARKER,RECTUS,TEMA,SNAP-TITE
    MaterialBrass,Stainless Steel,Carbon Steel
    ApplicationHydraulic Pipe, Chemical Fertilizer Pipe, Gas Pipe, Pneumatic Connections
    Size2 inch, 1 inch, 1/2 inch, 3/4 inch
    Model Numbersnaptite,parker Rectus
    ConditionNew
    ValvingYes

    HYDRAULIC COUPLING S60 SERIES Snap-tite quality with superior pressure and flow characteristics over the competition :

    Interchangeable with Aeroquip FD42 and Parker 4000 Series 4:1 Safety factor Proven ball-lock mechanism provides positive connection Poppet style shut-off High strength steel construction Zinc Trivalent Chromate plating for corrosion resistance Choice of seal materials to handle a variety of fluids Sizes 1/4" & 3/8"=Conforms with ROHS and WEEE European Union Directives demanding hydraulic applications. Typical applications include snow plows, agricultural equipment and construction equipment. The 60 Series will interchange with Aeroquip’s FD42 Series and Parker’s 4000 Series. The 60 Series coupler is provided with a retaining groove for bulkhead mounting. The poppet style valve design provides excellent sealing in both high and low pressure applications. The60 Series offers up to 3000 psi (210 bar) operating pressure in both the connected and disconnected positions.=AEND FITTING TECHNICAL AND DIMENSIONAL INFORMATION EF ENGAGEMENT SIZE END FITTING D HEX60C*INC.G HEXC .03DIA60N*B DIA ACROSS CORNERS SIZEH DIA ACROSS CORNERS A B C D E F G H IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/4" 2.15 54.61 .96 24.38 1.12 28.45 .88 22.35 1.56 39.62 .77 19.56 .75 19.05 .83 21.08 SIZE 3/8" 2.41 61.21 1.31 33.27 1.38 35.05 1.19 30.23 1.76 44.70 .90 22.86 .94 23.88 1.03 26.16.



    Additional Information:

    • Item Code: SNAP-TITE
    Get Best QuoteRequest Callback
    Parker Brass Quick Release Coupling

    Parker Brass Quick Release Coupling

    Product Price: Rs 3,000 / UnitGet Best Price

    Minimum Order Quantity: 5 Unit

    Product Details:
    MaterialBrass
    ApplicationStructure Pipe, Hydraulic Pipe
    Size2 inch, 1/2 inch, 3/4 inch, 1 inch
    Tolerance+/-0.01mm
    Working Pressure3000 psi
    PARKER BRASS QRC HYDRAULIC COUPLING S60 SERIES
    Parker QRC quality with superior pressure and flow characteristics over the competition 

    Features:
    • Interchangeable with Aeroquip FD42 and Parker 4000 Series
    • 4:1 Safety factor
    • Proven ball-lock mechanism provides positive connection
    • Poppet style shut-off
    • High strength steel construction
    • Zinc Trivalent Chromate plating for corrosion resistance
    • Choice of seal materials to handle a variety of fluids
    • Sizes 1/4" & 1"=Conforms with ROHS and WEEE European Union Directives demanding hydraulic applications. 

    Typical applications include snow plows, agricultural equipment and construction equipment. The 60 Series will interchange with Aeroquip’s FD42 Series and Parker’s 4000 Series. The 60 Series coupler is provided with a retaining groove for bulkhead mounting. The poppet style valve design provides excellent sealing in both high and low pressure applications. The 60 Series offers up to 3000 psi (210 bar) operating pressure in both the connected and disconnected positions.
    Get Best QuoteRequest Callback
    Nitto Hydraulic Quick Coupler

    Nitto Hydraulic Quick Coupler

    Product Price: Rs 1,500 / PieceGet Best Price

    Minimum Order Quantity: 25 Piece

    Product Details:
    Working Temperature-20 Deg C To 180 Deg C
    MaterialSteel Brass
    Rated Pressure10000 PSI
    Size1/8-2 inch
    Rated Flow11.5~190L/min
    Parker-hans Nitto kohki group provides support for more comfortable living today and a better life tomorrow across a broad spectrum of fields, from households to construction sites, from the aeronautic industry to global environmental activities. The group also meets ever-diversifying needs with superior engineering that promotes rationalization and labor-saving. New technologies that are unique, considerate of users, and convenient for people are being developed as next-generation tools.

    Features:
    • Minimizing spillage during disconnection keeps workshops clean
    • Unique seal design reduces both liquid spillage and air ingress
    • Volume of spillage: about 96% less vs sp cupla type a
    • Volume of air ingress: about 94% less vs sp cupla type a
    • New valve design offers smooth zero-friction movement resulting in reduced chance of malfunction caused by deterioration of valve parts.
    Get Best QuoteRequest Callback
    Snaptite Quick Release Coupling

    Snaptite Quick Release Coupling

    Product Price: Rs 5,500 / PieceGet Best Price

    Minimum Order Quantity: 10 Piece

    Product Details:
    MaterialBrass
    ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
    Size2 inch, 1 inch, 3/4 inch, 1/2 inch
    Tolerance+/-0.01 mm
    Working PressureUp to 350 Bar
    Since 1935, the Quick Disconnect and Valve Division of Snap-tite Inc.,has offered more combinations, sizes, and types of quick disconnect couplings than any other manufacturer in the world today.Hundreds of markets and industries depend on our couplings ’ability to perform under the most demanding conditions.From the ocean floor to the very edges of our solar system,and everywhere in between, Snap-tite quick disconnects set the industry standard.Our strength is providing expert solutions matched to the needs of each customer... highly consistent quality in exactly the right product, delivered on time, at the right price.Performance without compromise is Snap-tite’s promise.It means doing whatever it takes to make your business more profitable.It’s a commitment our people make every day.Product Types:

    Dry Break Coupling
    Dry break: A term given to a sliding sleeve style hydraulic quick disconnect with features that include an ability to connect with virtually no air inclusion or disconnect with little or no spillage.Also commonly referred to as Non-Spill, Flat Face, and Clean Break.
    Hydraulic, chemical service, ideal for test standsand applications where endurance and cleanliness is arequirement.


    Features:
    • Ball-locking, push-to-connect construction
    • Flush face design allows for easier contaminant inspection and cleaning
    • Flush valve virtually eliminates fluid loss and air inclusion
    • Dirt tolerant, heavy duty construction withstands abusive treatment
    • Superior flow characteristics and low pressure drop
    • Plated steel or 316 stainless steel construction†
    • Working pressures to 10,000 psi (690 bar)
    • Sizes from 1/8" to 2" 

    Construction & mobile equipment, hydraulichand tools, in-plant hydraulics – anywhere a drybreak isrequired for cleanliness or where thermal expansion exists.

    Applications:
    • Meets requirements of ISO 16028 specification
    • Connect under pressure capability available
    • 3/8" size also meets or exceeds the requirements of HTMA ANSI/NFPA T3.20.15-1991
    • Ball-locking design with push-to-connect feature
    • Minimal air inclusion and spillage
    • Plated steel construction
    • Working pressures to 4,600 psi (317 bar)
    • Sizes 1/4" to 1" (6.3 mm to 25 mm)
    • General purpose drybreak coupling
    • Ball-locking design with push-to-connect feature
    • Safety sleevelock as standard
    • Connects against static pressures up to 200 psi (14 bar)
    • Plated steel construction
    • Working pressures to 3,000 psi (207 bar)
    • Sizes are 3/8" and 1/2"Low pressure hydraulic systems, high purity systems, fuel systems, electronic coolant and high reliability systems.
    • Lightweight drybreak coupling
    • Compact ball-lock design with push-to-connect feature
    • Color coded lock indicator
    • Performance meets or exceeds MIL-C-7413B and MIL-C-25427A specifications
    • Aluminum or 316 stainless steel construction
    • Working pressures to 1000 psi (69 bar)
    • Sizes 1/4" to 2 

    Poppet Style Coupling
    Poppet: Refers to the type of valve used to stop fluids from flowing when the two mating parts of a quick disconnect are separated. Chosen for its simplicity in both function and manufacture ability,the poppet style quick disconnect is the most common type available today
    Get Best QuoteRequest Callback
    Snaptite Quick Coupler

    Snaptite Quick Coupler

    Product Price: Rs 4,500 / UnitGet Best Price

    Minimum Order Quantity: 50 Unit

    Product Brochure

    Product Details:
    Usage/ApplicationHydraulic Pipe
    MaterialBrass & Copper
    Size1/4- 6 inch, 1 inch
    Packaging TypeBox
    Working Pressures11,000 psi
    56 SERIES Snap-t ite quality with superior pressure and flow

    Characteristics over the Competition:
    • Engineered for operating pressures to 12,000 psi (828 bar) with 4:1 safety factor
    • High strength steel construction with corrosion resistant Zinc Trivalent Chromate plating
    • Proven dog-lock mechanism provides safe, positive connection and eliminates ball brinnelling
    • Interchangeable with Parker WB Series and Aeroquip FD69 Series
    • Nipple mounted sleeve guard and coupler sleeve lock aid in preventing accidental disconnection
    • Straight through bore provides minimal pressure drop
    • Available in 1/2" body size with 3/8" or 1/2" end fittings Conforms with ROHS and WEEE European Union Directives Snap-tite's 56 Series is designed for rugged, high pressure water blasting equip-ment used in cleaning and paint stripping applications. Snap-tite has increased theworking pressure to 12,000 psi (828 bar) while maintaining a 4:1 safety factor and interchangeability with competitive units. The 56 Series utilizes a proven dog-lock mechanism that increases surface contact and provides even load distribution under pressure thereby increasing the service life of the coupling.In addition to cleaning and paint removal, water blast equipment is also used inthe cleaning of maritime vessels as well as the removal of mill scale in industrial


    Additional Information:

    • Item Code: SNAPTITE
    • Pay Mode Terms: T/T (Bank Transfer)
    • Port of Dispatch: DELHI
    Get Best QuoteRequest Callback
    Snaptite Quick Release Coupling

    Snaptite Quick Release Coupling

    Product Price: Rs 5,500 / NumberGet Best Price

    Minimum Order Quantity: 10 Number

    Product Details:
    Usage/ApplicationHydraulic Pipe
    MaterialStainless Steel
    Size1/2'~6 inch
    ShapeRound
    Tolerance+/-0.01mm

    High reliability military, aerospace, and medical applications as well as chemicals and other corrosive materials.Ball-lock design with push-to-connect featureLower air inclusion, spillage, and pressure drop than required by MIL-C-25427A specifications Performance meets or exceeds MIL-C-7413B specificationsAluminum or 316 stainless steel constructionWorking pressures to 5,500 psi (379 bar)Sizes 1/8" to 1-1/4" Hydraulic circuits, test stands, and Hydrotesting for for offshore drilling and production platforms.

    Superior flow characteristicsInternal safety sleeve-lock prevents accidental disconnectionHeavy duty constructionProven dog-lock mechanism provides safe, positive connectionVarious end fittings available including Autoclave end connectionsPlated steel or stainless steel constructionWorking .

    Traditional ball-locking two-piece construction allows end fitting versatilityLowest pressure drop for sizeSmallest envelope size for sizeSmooth jet stream valve designIH Option for reciprocating, pulsating and rotary motion air tools (single shut-off combination)PH Option for connection against static hydraulic pressure (one side only)Plated steel, brass, aluminum or 316 stainless steel construction .

    Get Best QuoteRequest Callback
    Parker ST Series High Flow (Unvalved) Hydraulic Quick Release Coupling

    Parker ST Series High Flow (Unvalved) Hydraulic Quick Release Coupling

    Product Price: Rs 25,000 / NumberGet Best Price

    Minimum Order Quantity: 50 Number

    Product Details:
    Usage/ApplicationHydraulic Pipe
    MaterialCarbon Steel
    Model Name/NumberParker ST Series High Flow (Unvalved) Hydraulic Quick Release Coupling
    BrandPARKER
    Thread TypeFemale Thread,Male Thread
    StyleParker ST Series High Flow (Unvalved) Hydraulic Quick Release Coupling
    TemperatureUp to 204 DegreeC Up to 400 DegreeF 250 to 400 DegreeF
    PressureUp to 6700 psi Up to 462 bar
    ConnectionNPTF Female Thread,Male Thread
    Size/Dimension1/8,1/4,3/8,1/2,3/4,1,1 1/4,1 1/2 inch
    Thread Size1/8,1/4,3/8,1/2,3/4,1,1 1/4,1 1/2 inch
    TypeParker ST Series High Flow (Unvalved) Hydraulic Quick Release Coupling
    I Deal InNew Only
    Parker's high flow quick couplers and nipples are unvalved for use where fluid lines require fast and easy connection and disconnection while providing maximum flow and low pressure drop.

      ST Series high flow Couplers (hydraulic, fluids) up to 6700 psi connect with ST Series high flow Nipples.
      Parker's ST Series are unvalved quick couplings with manual sleeves providing high flow and low pressure drop. The smooth, straight through flow path allows easy cleaning where the same lines are used for more than one media. These straight through couplers and nipples are available in a wide range of sizes and materials for pressure ranges up to 6700 psi.

      Technical Characteristics:
      • Sizes: 1/8” – 1-1/2”
      • Materials: Brass, 303 Stainless Steel
      • Port Ends: Female NPTF, Male NPTF
      • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene
      Other Coupler options include: Sleeve lock

      Markets:
      • Industrial
      • Construction
      • Commercial Cleaning
      • Agriculture

      Features/Benefits:
      • Multi-purpose high flow coupling, widely used in varied applications
      • Wide range of sizes and material options
      • Optional coupler sleeve lock helps to prevent accidental disconnection
      • Functionally interchanges with similar straight through quick couplings

      Applications:  
      • High pressure water
      • Steam washers
      • Carpet cleaners
    Get Best QuoteRequest Callback
    Parker HO Series High Flow (Unvalved) Hydraulic Quick Release Coupling 15000 PSI

    Parker HO Series High Flow (Unvalved) Hydraulic Quick Release Coupling 15000 PSI

    Product Price: Rs 35,000.00 / NumberGet Best Price

    Minimum Order Quantity: 100 Number

    Product Details:
    Usage/ApplicationHydraulic Pipe
    MaterialCarbon Steel
    Model Name/NumberParker HO Series High Flow (Unvalved) Hydraulic Quick Release Coupling 15000 PSIParker HO Series Hig
    BrandPARKER
    Thread TypeNPTF FEMALE THREAD
    ShapeParker HO Series High Flow (Unvalved) Hydraulic Quick Release Coupling 15000 PSI
    Pressure ResistanceUp to 15000 psi Up to 1034 bar
    StyleParker HO Series High Flow (Unvalved) Hydraulic Quick Release Coupling 15000 PSI
    Temperature121 DegreeC 250 DegreeF
    I Deal InNew Only
    Parker's high pressure and high flow quick couplers are ideal for use with high pressure hydraulic applications where fluid lines require fast and easy connection and disconnection while providing maximum flow and low pressure drop.

      HO Series Couplers (hydraulic) up to 15,000 psi connect with HO Series Nipples.
      Parker's HO Series are high pressure, steel, high flow quick couplings with manual sleeves. Couplers and nipples are unvalved, resulting in straight through, unrestricted flow. Electroless nickel plating provides corrosion resistance and sleeve lock guards against accidental disconnection.

      Technical Characteristics:
      • Sizes: 1/4”, 3/8", 1/2”
      • Material: Steel with electroless nickel plating
      • Port Ends: Female NPTF
      • Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

      Markets:  
      • Pulp and paper
      • Oil and gas
      • Testing

      Features/Benefits:
      • Sleeve lock guards against accidental disconnection
      • Straight through, unvalved design provides full flow with minimal pressure drop
      • Electroless nickel plating adds corrosion resistance

      Applications:  
      • Paper and pulp processing
      • Refinery systems
      • Testing systems
    Get Best QuoteRequest Callback
    Parker Snap-Tite NGV Series Natural Gas Vehicle Fueling Breakaway Coupling - Fill Line

    Parker Snap-Tite NGV Series Natural Gas Vehicle Fueling Breakaway Coupling - Fill Line

    Product Price: Rs 25,000.00 / UnitGet Best Price

    Minimum Order Quantity: 500 Unit

    Product Brochure

    Product Details:
    MaterialStainless steel
    Dimension/SizeBNGVC2,BNGVN2,NGVC2,NGVN2,NGCV4A
    BrandPARKER,SNAP-TITE
    Working Pressure3600 PSI
    Size9/16UNF
    MediaCNG Natural Gas Vehicle Fueling
    Packaging TypeBox
    Usage/ApplicationNatural Gas Vehicle Nozzles CNG Fueling Nozzles & Breakway Coupling

    Snap-Tite NATURAL GAS VEHICLE PRODUCTS - Safety is a prime concern to Snap-tite. Snap-tite has designed a patented feature into the nozzle that makes it one of the safest designs available. The nozzle cannot be manually disconnected from the receptacle while under internal pressure greater than 350psi (25bar). This feature exceeds the requirements of NGV 1 specification.

    Natural Gas Vehicle Nozzles CNG Fueling Nozzles
    Meets interchangeability requirements of NGV1 specification
    - Meet requirements of Type 2 & 3 Class A & B of NGV1 specification
    - Available in pressures 3,000 & 3,600 psi (207 & 248 bar)
    - Stainless steel or brass construction
    - Various end fittings options

    Natural Gas Vehicle Receptacles
    NGV1 Fueling Recepatacles
    Utilizes the NGV1 profile for complete interchangeability
    - Designed for permanent mounting in vehicle
    - Available in pressures 3,000 & 3,600 psi (207 & 248 bar)
    - Stainless steel or brass construction
    - Superior valve design
    - Various end fitting options
    - Compact one piece design

     

    Compressed Natural Gas Inline Breakaway
    CNG Dispenser Breakaway
    Specifically designed for CNG applications
    - Balanced design assures positive connection
    - Easy installation - Engineered for use in both relieving and non-relieving systems
    - For use with pressures to 3,600 psi (248 bar)
    - Combination of stainless steel & brass construction


    Compressed Natural Gas (CNG) Check Valve
    Vehicle Safety Check Valve
    Used in conjunction with CNG receptacle as safety measure in vehicle as redundant check
    - Working pressure to 3,600 psi (248 bar)
    - Same internal design as CNG receptacle
    - One piece stainless steel construction
    - Various end fitting option



    Polyurethane Crimped
    NGVNDStorage Receptacle Dummy


    Additional Information:

    • Item Code: CNG.QRC.COUPLING
    • Delivery Time: 6-8 WEEK
    Get Best QuoteRequest Callback
    Snaptite Hydraulic QRC

    Snaptite Hydraulic QRC

    Product Price: Rs 3,500 / UnitGet Best Price

    Minimum Order Quantity: 5 Unit

    Product Brochure

    Product Details:
    MaterialSS,Brass
    Usage/ApplicationHYDRAULIC,GAS
    Size1/2 inch, 3/4 inch
    Working Pressures7,500 psi
    Grade303 or 316
    Parker Series Quick Release couplings meet ISO 7241-1, Series B interchange and are used across a wide spectrum of hydraulic applications. These double shut-off couplings can be used anywhere that fluid transfer lines are regularly connected and disconnected, and where a minimum loss of fluid is desirable. The product is primarily used with hydraulic fluid; however, general purpose 60 Series couplings are also used with chemicals, water, steam, and gas transfer lines.

    • ISO 7241 Series B standard • Sizes: 1/8” – 2 1/2” (1 1/2” and 2 1/2” not shown – contact Division • Rated pressure up to 5,000 PSI • Temperature range -40 to +250° F • Standard seal material is nitrile • Available in steel, brass, 303 & 316 stainless steel and aluminum 


    General purpose couplings are used across the spectrum of fluid system applications. Couplings can be found wherever fluid lines need to be connected or disconnected more efficiently, eliminating the need for additional tools to make the connection. Parker offers a broad range of coupling products for nearly every design requirement; including industrial, agricultural and mobile hydraulic systems. Couplings are available in steel, stainless steel, aluminum and other materials. Parker manufacturers the largest volume of quick coupling products in the industry and offers a wide variety of special port options and sealing materials for numerous applications.
    Get Best QuoteRequest Callback

    EXPLORE MORE CATEGORIES

    Looking For "Parker High Pressure Quick Release Coupling"?
    Thank you Your Enquiry has been sent successfully.
    © Hans Hydraulic & Pneumatics Systems. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.