EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Parker Hydraulic Tube Bender
Parker Hydraulic Tube Bender
Hydraulic Tube Bender Table of Contents WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog
Hydraulic Tube Bender Introduction Parker Hydraulic Tube Bender Model HB632 For 3/8" – 2" (10-50mm) tubing and 3/8 to 1-1/2 IPS Pipe The Parker Model HB632 Tube Bender is a hydraulically operated bender for bending annealed steel and stainless steel tubing from 3/8" O.D. through 2" O.D. It is operated by means of a separate power source producing 10,000 psi hydraulic pressure. It can be operated without bolting to a table or bench if no mandrels are required, making it an excellent unit to move about and use at the point where the tubing installation is being made. It can also be attached.
Parker Tube Benders
Product Price: Rs 15,000 / PieceGet Best Price
Minimum Order Quantity: 10 Piece
Product Details:
| Brand | Parker |
| Tube Outside Diameter | 1/4", 5/16", 3/8", 1/2", 6 mm, 8 mm, 10 mm, 12 mm |
| Bend Angle | 0-180 degree |
| Max Bending Radius | 100-150 mm |
These are individual benders for eight inch tube sizes (1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2” 5/8”, 3/4”). All of these benders will bend copper, aluminum, annealed steel and stainless steel. These can be used in hands or mounted in a bench vise. HOW TO USE: Simply align marks of the pressure arm and radius block, then bend to the desired angle (up to 180°) by pulling steadily on the slide block handle. Bend angles are indicated on the radius block, both front and back.
Ratchet Hand Tube Benders:
These are individual benders for three tube sizes, 5/8”, 3/4” and 7/8”, in copper, aluminum, annealed steel and stainless steel. They can be used in hands or mounted in a bench vise. HOW TO USE: Position the tube in the bender, close the latch and pull the ratchet handle away from radius block handle until the desired angle (up to 180°) is formed. Bend angles are indicated on the radius block.
Hand Tube Bender: Metric These are sturdy, easy-to-use hand tools for fast and accurate bending without kinks or visible flattening.These are individual benders for six metric tube sizes (5mm, 6mm, 8mm, 10mm, 12mm and 14mm). All of these benders will bend copper, aluminum, annealed steel and stainless steel. These can be used in hands or mounted in a bench vise. HOW TO USE: Simply align the marks on the slide block and radius block, then bend to the desired angle (up to 180°) by pulling steadily on the slide block handle. Bend angles are indicated on the radius block, both front and back.
Bench Mount Metric Hand Bender and Cutting Guide:
This bender combines a tube cutting guide with the bender for sizes 6mm, 8mm, 10mm, and 12mm. There are three bender rollers that cover all sizesAdditional Information:
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Get Best QuoteRequest A Callback
Parker Hydraulic Tube Bender
Product Price: Rs 15,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Details:
| Brand | Parker |
| Material | Mild Steel |
| Capacity | 1-5 Ton |
| Max Bending Radius | 150-200 mm |
| Automation Grade | Manual, Automatic, Semi-Automatic |
Hydraulic power does the work in bending tube of all materials in sizes from 6 (3/8” O.D.) through size 32 (2” O.D.), 10mm through 50mm, with wall thicknesses as great as .188 for annealed steel, and pipe sizes from 3/8” through 1-1/2”. See page R7 for wall thickness capabilities. The radius block, around which the tube is bent, is driven by a roller chain and sprocket powered by a cylinder and a separate hydraulic power unit. Maximum bend angle is 180° with radii from 1 1/4” to 8”. Close second bends can be performed in either direction.
An adjustable stop controls the degree of bend to a maximum of 180° and is graduated in 1° increments. After the bend is completed and pressure is released, a spring returns the clamp arm to the zero starting position. The clamp vise arm features a quick release speed screw for positioning the required clamp block. Each size of tube requires the proper sized radius block, clamp block and slide block. Written instructions, a DVD and Bulletin 4391-B26 are included with each bender. HB632 radius blocks, slide blocks and clamp blocks will work with the following benders as well: 624, 824, 832 and 848. NOTE: For size 28 (1 3/4” O.D. tube) through 32 (2” O.D. tube) radius blocks, an adapter plate is required. DIMENSIONS: L – 40” W – 11” H – 12” COMPONENTS REQUIRED Minimum components required are a Model HB632 Bender, hose assembly, hydraulic pump and a radius, slide and clamp block which match the tube/pipe O.D. to be bent.
CP432 Tube and Pipe Bender
A 90 psi air supply does all the work for bending steel and stainless steel tube and pipe. This bender utilizes a center push bending method which is easy to master. Offered in an all inclusive kit. See Bulletin 4391-CP432 for more information. A separate accessory kit of tooling for bending 10mm through 50mm tube is also available. See page R20 for part number information. Part Name Part No. CP432 Tube and Pipe Bender Kit. CP432 Includes all tooling necessary for bending 1/4” thorugh 2” tube and 1/2 through 2” pipe.
Additional Information:
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Get Best QuoteRequest A Callback
Parker Tube Cutter
Product Price: Rs 6,500 / PieceGet Best Price
Product Details:
| Material | Stainless Steel |
| Usage/Application | Cutting |
| Brand | Ridgid |
| Packaging Type | Box |
| Tube Cutter Size | 1~12mm |
Additional Information:
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Get Best QuoteRequest A Callback
Parker Karrymat Crimping Tools
Product Price: Rs 7.5 Lakh / PackGet Best Price
Minimum Order Quantity: 5 Pack
Product Details:
| Brand | Parkor |
| Weight | Approx. 28 kg |
| Minimum U-Bend | 66 mm |
| Tube Outer Diameter | 6 to 42 mm |
| Total Cycle Time | Approx 30 - 60 seconds |
The HVM-B pre-assembly unit and the EO-Karrymat are reliable aids for quick and safe installation of Ermeto Original fittings.
HVM-B:
The HVM-B is a simple tool for fast and safe pre-assembly of EO progressive stop rings / progressive rings. The handy device can be taken to any assembly site. It is suitable for the LL, L and S series as well as pipe sizes from 4 to 15 mm outside diameter in steel. The HVM-B weighs approx. 7 kg without tools. The economic production amount is 20 Mondays / day.
Applications:
• Suitable for general hydraulic applications.
Features / Benefits:
• Using the HVM-B hand pre-assembly saves time and effort.
• The consistently high assembly quality ensures the reliable function of the fittings.
• Due to their low weight, ease of use and simple concept, EO assembly aids are the ideal tools for pipe preparation in small quantities.
• The HVM-B is a flexible tool that can be used anywhere for secure bolted assembly, even where EOMAT technology is not available
Additional Information:
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Get Best QuoteRequest A Callback
EO2 and Triple Lok Parker Eomat Assembly Machines
Product Price: Rs 4.25 Lakh / PieceGet Best Price
Product Details:
| Max Bending Radius | 0-50 mm |
| Frequency | 50 Hz |
| Voltage | 400 V |
| Material | SS |
| Weight | Approx 30 kg |
| Tube Outside Diameter | 4-42 mm |
| Phase | 3 Phase |
EOMAT machines are specifically designed to meet the high standards of the EO-2, EO PSR / DPR progressive ring and Triple Lok® fittings. The assembly is achieved with high precision and repeatability.
Additional Information:
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Get Best QuoteRequest A Callback