Send SMS
Send E-mail

Parker O-Ring ,Oil Seals NBR VITON

Leading Authorized Wholesale Dealer of parker o- ring, parker piston seal and parker hydraulic seal from Delhi.
Request CallBack
Parker O- Ring
Get Best Quote

Parker O- Ring

Approx. Price: Rs 150 / PieceGet Latest Price
Product Details:
MaterialAluminum, Rubber
TypeParker O-Ring
Automation GradeManual
An o-ring is a torus, or doughnut-shaped ring, generally molded from an elastomer. O-rings are used primarily for sealing. They are also used as light-duty, mechanical drive belts. advantages of o-rings:
  • They seal over a wide range of pressure, temperature and tolerance,
  • Ease of service, no smearing or retightening,
  • No critical torque on tightening, therefore unlikely to cuase structural damage,
  • O-rings normallyng compound first, as the selected compound may have significant influence on gland design parameters. essentially, the application determines the rubber compound; the primary factor being the fluid to be sealed. The elastomer however, must also resist extrusion when exposed to the maximum anticipated system pressure and be capable of maintaining good physical properties through the full temperature range expected. In dynamic applications, the selected material must also have the toughness and abrasion resistance so important in reciprocating and rotary seals. polymer families - select a polymer to view the available compounds offered within that family. polyacrylate (acm) ethylene acrylate (aem) butyl rubber (iir)polychloroprene rubber (cr)ethylene propylene rubber (epm, epr, epdm)fluorosilicone (fvmq)acrylontirile-butadiene (nbr)hydrogenated nitrile (hnbr, hsn)polyurethane (au, eu)silicone rubber (vmq, pvmq)fluorocarbon (fkm, fpm)tetrafluoroethylene-propylene (aflas)high performance fluoroelastomer (hifluor)perfluoroelastomer (parofluor)perfluoroelastomer (parofluor ultrable. require very little room and are light in weight,
  • In many cases an o-ring can be reused, an advantage over non-elastic flat seals and crush-type gaskets,
  • The duration of life in the correct application corresponds to the normal aging period of the o-ring material,
  • O-ring failure is normally gradual and easily identified,
  • Where differing amounts of compression effect the seal function (as with flat gaskets), an o-ring is not effected because metal to metal contact is generally allowed for,
  • They are cost-effective where to begin.in designing an o-ring seal, it is best to determine the o-ring

Yes! I am interested
Request CallBack
Parker Piston Seal
Get Best Quote

Parker Piston Seal

Approx. Price: Rs 2,500 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
MaterialPU
StyleHydraulic
Temperature-30-+100deg C
Parker’s piston profiles are fluid seals specifically designed to function as piston seals in pneumatic and hydraulic cylinder applications. The outside diameter lip is designed to seal against the cylinder bore while the inside diameter lip is designed to seal the gland. For most non-symmetrical piston profiles, the size of the seal is slightly smaller in diameter than the gland diameter. When installed, the seal stretches into the gland to ensure a tight seal with the gland and improved stability in application. The vast symmetrical and non-symmetrical profile options, proprietary compounds, and size range establish Parker as a leader in the industry providing quality solutions for pneumatic and hydraulic applications

Yes! I am interested
Request CallBack
Parker Hydraulic Seal
Get Best Quote

Parker Hydraulic Seal

Approx. Price: Rs 750 / PieceGet Latest Price
Product Details:
Minimum Order Quantity100 Piece
MaterialRubber
Hardness65 HA
Temperature-40-120

Hydraulic sealing systems for earth moving/construction machinery, agriculture machinery, agricultural/forestry machinery, material handling, industrial hydraulics, vehicle engineering and mining.

Products: Rod & piston seals, wipers, flange seals, guide tape & rings, rotary distributor seals, diaphragms (Rubber & PUR), polyurethan O-rings, accumulator Seals, specials.

Basic materials: All known types of rubber, polyurethane (Ultrathan®), PTFE (Polon®), fabric and metal reinforced elastomers and plastics.


Yes! I am interested
X