- Home
- ยป
- Our Products
- »
- Parker Sae Hydraulic Flange
Parker Sae Hydraulic Flange
Parker Hydraulic SAE Non Weldable Flange
Flange Face Type | Weld Neck |
Size | 5-10 inch |
Material | Stainless Steel |
Application | Industrial |
Technics | Forged Casting |
Weld nozzle flanges are designed with butt weld type to weld the pipe on both the side to the attached nozzle. weld nozzle flanges are consists of set of split flanges assembled with weld nozzle both side with o ring , allen bolts & nuts. weld nozzle flanges are easy for assembled, weld & ease of removal during assembly or disassembly of piping joints.
Sae weld nozzle flanges are used for bigger sizes of joints in the piping conncetion where nut & ferrule asembly is not possible. sae weld nozzle flanges are in moc - steel , stainless steel sae weld nozzle flanges are assembled with split flanges or mono flanges or flat socket type flanges with weld nozzle on both side having o ring seal groove.
sae weld nozzle flanges are designed as per iso 6162 with static pressure for 3000 psi & 6000 psi series.
Parker SAE Flange
Minimum Order Quantity: 25 Piece
Material | Carbon Steel |
Brand | Parker |
Packaging Type | Box |
No. Of Holes | 4 |
Size | 1/2-48 inch |
Flanges by Parker are Designed to:
- Provide different methods of connecting a tube, hose, pipe or other fittings to standard ports
- Replace weld fittings
- Interface with pressure measuring systems
Hydraulic Flanges are connection between hoses or seamless tubes where easy removal is required with in close quarters in the piping systems. Hydraulic Flanges are mainly used for Bigger sizes of tubes in NB ( Nominal Bore ) sizes. Hydraulic Flanges are used in bigger sizes of Piping joints Where Nut & ferrule assembly is not possible due to higher in Hex section sizes & High torgue require to tighetened / Grip the ferrule in to the tube & lead to loose the joints at High pressure application. In such cases the usage of Flanges with Butt weld or Socket weld has been found to be more practical leading to compact piping installation. Further , the orientation of Hydraulic Flanges joints can be so done to minimize the distance between pipes and provide for a compact installation. CETOP Flanges and ISO 6164 Specify Flanges with Butt weld ends and Square clamping Flanges for 250 bar and 400 bas static working Pressure respectively. These correspond to 160 bar and 315 Bar dynamic Working Pressures. The Flange System consist of a Sleeve to be Butt or Socket Welded to the Pipe and clamped together betwwen two square Flanges by a set of four Hex bolts , Nuts and Spring washers, One of the sleeves carries an O ring groove fitted with an O ring for sealing the interface.
The use of ISO 6164 Flanges has one disadvantage , The size of the Square Flange require a higher pitch between pipes due to the Flange Sizes. In order to reduce the distance between pipes , SAE introduced their own Standards which are now incorporated in to ISO 6162 for the 3000 psi and 6000 psi static Pressure ranges respectivelty. SAE system depends on the same set of butt welding sleeves held together by a set of Split Flange and Solid Flange secured by Hex Bolts and Nut.
Hydarulic Flanges | Standard | W.P = PSI .SERIES | SIZES IN NB | SIZES IN OD IN MM | CLICK to Submit | ||
SAE Flanges | ISO 61 | ISO 62 | 3000 | 6000 | 1/4' NB UP TO 5'NB | 15 MM OD UP 140 MM OD | Enquiry Form |
CETO Flanges | CETOP RP 63H | 3000 | 6000 | 1/4' NB UP TO 5'NB | 15 MM OD UP 140 MM OD | Enquiry Form | |
4 Bolt Square Flanges | ISO/ DIS 6164 | 3000 | 6000 | 1/4' NB UP TO 5'NB | 1/4' NB UP TO 5'NB | Enquiry Form |
Parker Sae Female Threads Flanges
Minimum Order Quantity: 25 Piece
Material | Stainless Steel |
Usage/Application | Industrial |
Size | 1-5 inch |
Number Of Hole | 4 |
Head Shape | Round |
Pressure | 3000 PSI & 6000 PSI |
Parker Split Flange
Minimum Order Quantity: 25 Piece
Size | 0-1 inch, 1-5 inch |
Material | Carbon steel |
Application | Hydraulic Hose Fitting |
Usage | Spare Parts |
Flanges by Parker are designed to:
- Provide different methods of connecting a tube, hose, pipe or other fittings to standard ports
- Replace weld fittings
- Interface with pressure measuring systems
Split Flanges are designed as per ISO 6162 - 3000 psi series & 6000 Psi Series only. Split Flanges are used for Hose assembly where easy removal piping can be possible with in close area Split Flanges are in 2 halves attached with Weld nozzle with Allen bolts , Nuts & O ring Seal. SAE Split Flanges are in MOC - Steel , Stainless Steel SAE Split Flanges are assembled with Weld Nozzles or Mono Flanges or Flat Socket type flanges with Weld Nozzle on both side having O ring Seal groove.