Send SMS
Send E-mail

Parker Fluid System Connectors & Fittings

Parker is a world leader in the manufacture of fluid connectors for all sectors of industry. With connectors for tubing, hose, and pipe, Parker's engineers have been developing innovative productsfor over 50 years. Whether the application is in food and beverage, transportation, chemical processing, power generation or refining, Parker has a wide array of adapters to meetfluid delivery needs. From low pressure, push-to-connect, pneumatic fittings to high pressure Code 62 hydraulic flanges, Parker has the solution.

Parker holds tight tolerances in their manufacturing processes to makereliable fittings that produce leak-free systems for years of dependable service. Quality material selection and superiorplating givefittings from Parker unmatched assurance against red rust and other corrosive agents.

Parker produces many well-knownfitting and adapter types including Triple-Lok JIC tube adapters, Ferulok bite-type flareless fittings, Prestolokpush-to-connect fittings, Seal-Lok face seal adapters, Par-Barb hose adapters and Prestomatictransportation fittings

The flareless bite type fitting was pioneered by Ermeto in Germany in the early 1930's. When Parker Hannifin acquired Ermeto, it introduced the EO fittings to the US. Today, the EO fittings are the most widely used bite type fittings in the world.

Fluid Connectors
  • Push to Connect
  • Compression
  • Brass Adapters
  • Flare
  • Transportation
  • Barbed
  • Accessories
Request CallBack
Parker Ermeto Ball Bearing Rotary Fittings
Get Best Quote

Parker Ermeto Ball Bearing Rotary Fittings

Approx. Price: Rs 6,500 / PieceGet Latest Price
Product Details:
Minimum Order Quantity5 Piece
ApplicationHydraulic Pipe
TypeFerrule
BrandParker
MaterialSS
ConnectionWelded, Male, Female
SizeSS

Parker offers fittings that provide leak free solutions. Fitting styles include Ball bearing rotary fittings are used for working pressures up to 250 bar. Favorable pressure/RPM ratio. Compact maintenance-free construction, service-proved. Combined ball and plain bearing with constant lubrication. Low starting torque. War-resistant annular piston sealings. Flow media: Hydraulic oils and lubricant on mineral oil base. Also for hydraulic HETG and HEES. Not suitable for corrosive and HFC-fluids or gases. Materials: Casing, body nut and progressive ring of steel, annular piston sealing: POM (e.g. Delrin)/FKM (e.g. Viton®). Eolastic sealing: NBR (e.g. Perbunan, also available in FKM. Surface: Zinc-plated with yellow chromate (A3C). Product range: Series L tube o.d. 6 to 35 mm Series S tube o.d. 6 to 38 mm Construction: 8 different versions with one rotational axis. Multiaxial rotary couplings on request. Tube connections according to DIN 2353, series S. Maximum working pressure 250 bar (peak pressure). Male stud sealing by Eolastic seals of NBR. Male sutd with metric parallel or BSPP thread Nominal temperature: -25° C up to +80° C


Yes! I am interested
Watch Video
Request CallBack
Ermeto Rotary Bearing  Fittings
Get Best Quote

Ermeto Rotary Bearing Fittings

Approx. Price: Rs 4,500 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationHydraulic Pipe
Material GradeCs
ConnectionMale
Size1/2"
MaterialCS/SS
BrandPARKER ERMETO

Plain bearing rotary fittings for slow rotating, swinging or moving machine parts up to 40 bar (series L) or up to 100 bar (series S).

Flow media:
Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fluids HETG and HEES. Not suitable for corrosive and HFC-fluids or gases.

Technical Specifications:
Materials: Casing, body nut and progressive ring of steel. Sealing of NBR (Perbunan), on request of FKM. Plain bearing rotary fittings are not available in stainless steel or brass.
Surface: Cr(VI)-free
Construction-system:
Series L, tube O.D. 6 to 35 mm, working pressure (PN): 40 bar
Series S, tube O.D. 6 to 38 mm, working pressure (PN): 100 bar
Tube connection according to DIN 2353, ISO 8434-1. Male stud with metric thread and BSP thread. Sealing of male stud by Eolastic-seals.
Nominal temperature:
For sealings of NBR: -35°C up to +100°C
For sealings of FKM: -25°C up to +120°C

Markets:
• Chemical Industries
• Plant engineering
• Power stations
• Cable storage

Applications:
• Connecting a fixed point to a rotating, swinging or moving machine part via hoses. To prevent torsion and to avoid small hose radius.

Features/ Benefits of the ball bearing rotary fittings:
• Parker plain bearing rotary fittings help to avoid torsion of hoses and therefore improve the life cycle of these products
PRE-INSTALLED OPTIONAL ACCESSORIES

Plain bearing rotary fittings_Desc_Pre-installed Optional Accessories

CONNECTION 2 TUBE O.D. (MM)

06 to 38

DIAMETER NOMINAL (DN)

4.0 - 25.0

CONNECTION 2 STYLE

EO 24° cone end

SHAPE

Elbow male stud plain bearing rotary union, Straight male stud plain bearing rotary union

SEAL MATERIAL

NBR, FKM

CONNECTION SIZE

G 3/8 A to G 1 1/2 A, M 14x1.5 to M 48x2.0

SERIES

Light, Heavy

CONNECTION 1 STYLE

EO 24° cone end, Male BSPP thread - ED-seal (ISO 1179), Male metric thread - ED-seal (ISO 9974)

CONNECTION 1 TUBE O.D. (MM)

06 to 38

TUBE O.D. (MM)

6-42

MAXIMUM WORKING TEMPERATURE (C)

+250 Steel, +400 Stainless Steel

MAXIMUM WORKING TEMPERATURE (F)

+482 Steel, +752 Stainless Steel

MAXIMUM WORKING PRESSURE (MPA)

2.5-35

MAXIMUM WORKING PRESSURE (BAR)

25-350

MINIMUM WORKING TEMPERATURE (F)

-40 Steel, -76 Stainless Steel

APPLICATION

Agriculture Equipment, Automotive Process, Chemical Transfer, Construction Equipment, Fuel transfer, Hydraulic, Manufacturing Equipment, Marine, Material Handling, Mobile Equipment, Oilfield, Packaging, Transportation

MAXIMUM WORKING PRESSURE (PSI)

363-5076

MINIMUM WORKING TEMPERATURE (C)

-40 Steel, -60 Stainless Steel

CONNECTION TYPE

Bite Type, Soft Seal Bite Type

INDUSTRY STANDARDS

DIN ISO 8434

MATERIAL

Steel zinc plated (CrVI-free), Stainless steel


Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: 6-8 WEEK
Yes! I am interested
Request CallBack
Ermeto Fittings
Get Best Quote

Ermeto Fittings

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ConnectionMale, HYDRAULIC FITTINGS, Female, Flange, Welded
ApplicationChemical Fertilizer Pipe, Structure Pipe, Gas Pipe, Hydraulic Pipe
TypeFerrule, Adapters, Staplock Fittings, Swivel Nut, ERMETO FITTINGS
Size1/4
MaterialBrass, SS, MS
BrandErmeto Fittings
MaterialSS, MS, Plastic, Brass, Steel

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.


The EO-3 Fitting System can be used in Applications Such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: READY STOCK
Yes! I am interested
View PDF
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto Hydraulic Fittings
Get Best Quote

Ermeto Hydraulic Fittings

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ConnectionFlange, Male, Welded, Female
ApplicationHydraulic Pipe, Gas Pipe, Chemical Fertilizer Pipe
TypeAdapters, Ferrule, Swivel Nut, Staplock Fittings
Size1/4 inch
MaterialBrass, SS, MS
BrandPARKER HYDRAULIC FITTINGS
MaterialSS, MS, Brass, Steel

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.


The EO-3 Fitting System can be used in Applications such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: 6-8 WEEK
Yes! I am interested
Request CallBack
Parker Ermeto Original Tube Fittings
Get Best Quote

Parker Ermeto Original Tube Fittings

Approx. Price: Rs 500 / UnitGet Latest Price
Product Details:
Minimum Order Quantity10 Unit
Size1/2 inch, 2 inch, 1 inch, 3/4 inch
Thread SizeALL INCHES
Application High Pressure, Pneumatic Connections, Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe
BrandPARKER , ERMETO, EO
TypePARKER TUBE FITTINGS
Ermeto Bite Type Fittings Introduction:

The bite type fitting was designed by Ermeto in Germany in the early 1930’s. Ermeto-fittings soon became popular due to the simple assembly which basically just requires two wrenches. Today, the EO fitting is the most widely used bite-type fitting in the world. EO fittings are designed for metric tube. All threads, hexagons, bores and other dimensions are purely metric. Historically it is based on German national standards 2353, DIN 3861, DIN 3859 and DIN 2353, which today are represented in the international standards ISO 8434. EO fittings are recognized for the high pressure performance from a compact body. EO fittings are available in the three series for low, medium and high pressures (LL, L and S-Series). This allows cost savings and -space minimized solutions for each specific application.

New Generation:
High performance tube fittings


The new, chromium6-free fitting generation from Parker Ermeto is called EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology systems and EO2-FORM for formed tube soft-sealed systems without cutting rings. The new generation is characterized by maximum safety even under extreme pressures of up to 800 bar nominal pressure.

The further development of the proven Dry Technology EO-2 concept is designated EO2-Plus and gives extremely high pressure ratings and greatly reduced tightening torques for the larger fitting sizes. EO2-FORM is the new high pressure tube connection from Parker Ermeto. This concept unites the advantages of welded connections with those of EO-2 technology proven worldwide in millions of applications.
The New Generation from Parker Ermeto clearly exceeds the performance requirements of DIN/ISO standards: with its guaranteed 4-fold design factor, the new fitting generation can be used at the following nominal pressures in steel:

  1. Up to 500 bar in the L series
  2. Up to 800 bar in the S series
  3. A unique 420 bar in the 20 S–38 S sizes
This extraordinary pressure and assembly performance can only be achieved by the use of even better and more resistant materials in combination with a special coating of individual components. This greatly extends the application range and the user does not have to sacrifice any advantages. Thanks to the higher pressure levels, less expensive “L” series fittings can now be used instead of the heavier “S” series.
The new multifunctional PSR cutting ring, the heart of the EO-Plus fitting, ensures a uniquely simple and easy assembly through its multifunctional ring geometry.
The new high performance forging design with its considerably larger flats size makes assembly even safer and easier. Through the application of a chromium6-free surface treatment, Parker Ermeto meets future requirements of the automotive industry today, and respects the directive of the European Parliament to eliminate the use of Chromium6. The removal of Chromium6 reflects Parker’s ongoing commitment to an environmentally clean and safe production process. The additional “Plus”: the corrosion resistance is increased to more than 500 hrs. to white rust.
The EO-LUB procedure is yet another innovation unique to Parker. In addition to the standard dry wax lubrication of the tube nuts, all larger fittings (25S/28L and above) are EO-LUB treated. EO-LUB reduces the assembly torques by approximately 25%, which makes assembly easier and prevents under assembly, the most common reason for bite-type tube fitting failure. This latest fitting generation benefits from Parker’s long years of experience combined with continuous innovation. It is made with our state-of-the-art production methods, controlled by the strictest quality assurance systems and procedures.

Additional Information:
  • Item Code: EO
  • Port of Dispatch: DELHI INDIA
  • Delivery Time: READY STOCK
  • Packaging Details: PARKER EO / EO2 ERMETO FITTINGS EO2-FORM is the new high pressure formed tube Generation of the Tube Fittings Division Europe. As with EO2- Plus, it is designed in to eliminate leakage in all fluid systems, by using elastomeric sealing systems. The common feature of all EO2-FORM connections are the EO2 seal elements (Dry Technology) as well as the new cold forming process, that gives extreme rigidity and low tightening torques. The seals are now also available in FKM (e.g. Viton??) for applications with higher temperatures or aggressive media. Through EO2-FORM, elastomeric sealing technology is made available even where bite-type connectors are not popular, like in hydraulic presses, cranes, lifts or ship canal locks. Compared to welding or brazing, the EO2-FORM process is faster and easier. It does not require special tube treatment, heating or chemicals. EO2-FORM is designed for metric tube and fully interchangeable to the complete Ermeto Original product range according to ISO 8434-1 / DIN 2353. EO2-FORM is available in ???L???- and ???S???-Series. Function of EO2-FORM EO2-FORM is not a stand-alone product. It has been developed as an extension of the proven EO2-Plus system product range. All EO2-FORM components like nuts, seals and fitting bodies come from the EO2-Plus program. The only investment needed is the forming machine, which pays off quickly as it reduces assembly time and effort. Assembly characteristics of EO2-FORM are similar to EO2-Plus too. This allows the customer to use both products for his hydraulic pipework without increasing stock or confusing workfloor engineers with new components.
Yes! I am interested
Request CallBack
Parker Brass Fittings
Get Best Quote

Parker Brass Fittings

Approx. Price: Rs 267 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/2" to 1"
MaterialBrass
Working Temperature-50 deg C-120 deg C
TechnicsForged
PARKER BRASS FITTINGS
Whether it’s a pneumatic or hydraulic system, we have the brass fittings and valves to make the connections you need. From compression fittings to ball valves, we house the largest selection of Brass fittings and valves in the industry. Simply click on the Product Range link above to view the many products that we offer.

Advantages:

  • All pipe fitting threads are made to Dryseal standards. Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.

 


Specifications:

  • Meets functional requirements of the SAE J530, SAE J531 and ASA.

 


Applications:

  • Use with brass, copper or iron pipe. Manufactured for low and medium pressure line connection work.

 


Working Pressure and Temperature Ranges

  • From -65° to +250°F. at 1000 psi.


Vibration

  • Fair resistance to vibration and pipe movement depending upon conditions

 


Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto Original Hydraulic Fittings
Get Best Quote

Ermeto Original Hydraulic Fittings

Approx. Price: Rs 125 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationGas Pipe, Hydraulic Pipe, Structure Pipe
Size1/4 inch-1 inch, 1 inch-2 inch
ConnectionWelded, Male, Female
MaterialSS
Parker Fittings

PARKER-HANS
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:

  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
  • To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices. 

 


Yes! I am interested
Request CallBack
Parker Hydraulic Fittings
Get Best Quote

Parker Hydraulic Fittings

Approx. Price: Rs 325 / PieceGet Latest Price
Product Details:
Minimum Order Quantity10 Piece
ApplicationStructure Pipe, Hydraulic Pipe, Gas Pipe
ConnectionMale, Female, Welded
Size2 inch-3 inch, 1/4 inch-1 inch, 1 inch-2 inch
MaterialCopper, Brass, SS, MS

For more than 80 years, Parker Hannifin, the world's leading manufacturer of motion and control technology, has been developing high-pressure hydraulic fittings and setting standards globally. Over the years, new geometries and materials have improved the performance, reliabilty, and ease of installation of the original Ermeto fittings. Therefore, leakages in piping systems today cannot be ascribed to material defects, as they could be previously, but rather to improper installation. Assistance is provided in this regard by the new, quickly installable EO-3® fitting system. Its innovative form and technology raise pipe installation to a high level of quality, security, and economy.


Conical Connection Enables Seamless Installation:

  • When it comes to fittings, correct installation is essential, because the effects of leakages are not pleasent: cost-intensive downtimes, customer complaints, reworking, environmental damage, and even accidents. Given this context, with the EO-3® system Parker has developed a coupling concept that sets whole new standards.
  • EO-3® fittings enable simpler, quicker, and more secure installations. This is achieved with a new thread technology. In contrast to all prior (DIN-standard) fittings, the EO-3® system is based on a 24-degree inner cone with integrated soft seal and a cone-shaped connecting thread. The world's first and unique system of this kind, the EO-3® fitting enables the control of installation results from the outside. Using a yellow indication ring, the installer can tell immediately whether the fitting has been made correctly. 


Machine Pipe Forming with Proven Technology

  • For the new bolt connections, Parker uses the EO forming machine tool that is already on the market. With the machines users have been using up until now to produce, for example, the EO2-FORM connections, users can also create EO-3® fittings- an important contribution to cost reduction. This merely requires the respective EO-3® forming dies.

Ability to be Combined and Flexible Employment:

  • In addition to rigid tubework, many applications demand flexible hose connections. EO-3® is applicable in both variants. Linking to existing EO-2 connections is also possible without any problems thanks to an adapter. This means "old" fittings can be converted or upgraded to the EO-3® system at virtually no additional cost. The new fitting system offers four times as much safety and does away with the standard LL, L, and S series classifications that have previously been customary. But for a new exceptions, a single pressure stage of 420 bar applies to all tube sizes. Elastomeric materials can be selected specifically for applications and, thus, media.

Benefits of the new Concept at a Glance:

  • Immediately detectable thread intake
  • Quick manual pre-installation
  • Safer installation due to less effort.
  • Less space requirement for installing in difficult installation situations
  • Shorter installation time
  • Indication ring as a control option for the installer
  • Soft seal integrated in the cone improves sealing behavior - even with high system dynamics
  • Additional increased safety provided by elastomers pre-installed in the fitting body
  • Compact design means space-saving constructions

Yes! I am interested
Request CallBack
Parker Ermeto Fittings Eo/EO2
Get Best Quote

Parker Ermeto Fittings Eo/EO2

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
Minimum Order Quantity10 Piece
Automatic GradeAutomatic , Semi-Automatic, Manual
MaterialCarbon Steel
ApplicationChemical
UsageOil Gas Water Industrial
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards. Fittings from Parker are available in a variety of styles including:

  • High purity and process fittings
  • 37 and 45 degree flare fittings
  • Compression, bite type, o-ring face seal fittings
  • Straight thread, pipe, flange and barb fittings
  • Sanitary, steam and internally expanded fittings
  • Swivel, Universal and interlocking clamp fittings
  • Permanent crimp fittings
  • Push-Lok, Push to connect and air hose fittings
  • Skive type fittings (ParLock)
  • Hydraulic hose permanent (Parkrimp®) and reusable fittings Parker fitting facts Parker’s vast product offering of fittings are available in many configurations, including:
  • Straight fittings
  • 45 degree elbow / 90 degree elbow fittings
  • Tee fittings Parker’s fitting product line includes jump and reducing fitting options. Custom fittings are also available.

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Brass Ferrule Fittings
Get Best Quote

Parker Brass Ferrule Fittings

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
ConnectionFemale, Male
MaterialBrass & Copper
TypeFerrule Fittings

Design criteria require any fitting to achieve two functions – it must both seal against leaks and mechanically hold against system pressure. Unlike flare fittings which achieve both functions at the flare, flareless fittings are more complex. Sealing must be achieved at a minimum of two points (more in the case of two ferrules). First, a line contact seal must be "coined" between the contact point of the ferrule and the internal body seat. Second, a "bite" seal deep enough to penetrate surface scratches on the tube, must be established between the ferrule and the tube. Mechanical holding power is achieved by the "bite" into the tube causing displaced metal to be pushed up into a "wall" ahead of the bite. This "wall" prevents the tube from blowing out. The amount of force that is acting to push the tube out is calculated by multiplying system pressure by the cross section area of the tube. For example, blowout force on a 1/2" OD tube at 1000 psi static pressure is 197 lbs. Note that in the SAE flareless fitting, the bite is just as effective on a solid bar as it is on the medium to heavy wall tubing for which it was designed. Compare this to light duty instrumentation fittings (one or two ferrule) which rely on mechanical swaging of the tube for holding power. In these fittings, as the wall thickness increases, less swaging action is possible making such fittings unsuitable for heavy wall tubing and high pressures.


Vibration:
  • Vibration must be totally isolated from the "bite" area in any flareless fitting. The "bite" creates a stress riser which will cause fatigue and cracking if the vibration is not controlled. The SAE flareless fitting with its angle at the rear of the ferrule causes the ferrule to "bow" into a barrel shape and grip the tube at the rear. The rear grip channels vibration into the nut/body system shielding the "bite” area. Examination of two ferrule instrumentation fittings reveals that tube vibration is fed directly into the "bite" making these fittings undesirable for high pressure, high vibration service.

Remakeability & Reusability:
  • All flareless fittings must be tightened a bit more upon each remake. SAE hydraulic flareless fittings are designed for 15 remakes. Reusability of parts is limited in that a new ferrule is needed to re-tube.

Drawbacks:
  • While there is no need in small sizes, in 5/8” OD and larger all manufacturers recommend mechanically presetting the ferrule. The fitting is not recommended for thin wall tubing because of the high forces exerted upon the tube by the ferrule.

Interchangeability:
  • Because the dimensions of the fitting are controlled by the Society of Automotive Engineers (SAE), all manufacturers’ fittings will interchange, piece by piece.

Parker Exclusives
  • Only Parker has these important features: an exposed "bite" allowing visual inspection; forged shapes and nuts; rolled external threads; more shapes and sizes and availability in steel, stainless and monel.

Yes! I am interested
Request CallBack
Ermeto Brass Fittings
Get Best Quote

Ermeto Brass Fittings

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity100 Piece
ConnectionFemale, Male
MaterialBrass & Copper
TypeErmeto Brass Fittings

Advantages
All pipe fitting threads are made to Dryseal standards.
Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.


Specifications:

  • Meets functional requirements of the SAE J530, SAE J531 and ASA.

 


Applications

  • Use with brass, copper or iron pipe. Manufactured for low and medium pressure line connection work.

 


Working Pressure and Temperature Ranges

  • From -65° to +250°F. at 1000 psi.


Vibration:

  • Fair resistance to vibration and pipe movement depending upon conditions

 


Yes! I am interested
Request CallBack
Parker Triple-lok Fittings
Get Best Quote

Parker Triple-lok Fittings

Approx. Price: Rs 200 / PieceGet Latest Price
Product Details:
Size1/2 inch, 3/4 inch, 1 inch
ApplicationPneumatic Connections, Hydraulic Pipe, Chemical Fertilizer Pipe, Structure Pipe, Gas Pipe
TypeCopper, Brass

Parker’s triple-lok 37° flare tube fittings have been used in industry since mr. Parker pioneered the product in the 1930s. The 37° flare fitting is the most popular industrial tube/hose fitting connection in the world. Today, parker offers a broad range of triple-lok fittings meeting sae j514, iso 8434-2 and military standards and specifications. The triple-lok design is quite simple. The tube fitting consists of three pieces: the body, the nut and the sleeve. The tube end is flared at a mating 37° angle and sandwiched between the fitting nose (seat) and the sleeve creating an effective seal between the fitting nose and tube flare or hose. Parker’s triple-lok fittings are manufactured in steel, 316 stainless steel and brass for optimum fluid compatibility and corrosion resistance. Furthermore, available sizes range from 1/8" tube o. D. To 2" tube o. D. In several configurations. Adaptability to global ports is another key benefit of triple-lok. (standard ports include: sae, straight thread iso-6149, npt, bspt, bspp and din. ) The triple-lok tube fitting is also readily available for metric tubing and hose adapter applications. Simply by changing the industry standard sleeve, the same triple-lok body can be adapted to metric tubing in sizes ranging from 6 mm tube o. D. To 38 mm tube o. D. Likewise, by using only the body without the nut and sleeve, the triple-lok fitting is used as an industry standard hose adapter.


Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Weld Fittings
Get Best Quote

Parker Weld Fittings

Approx. Price: Rs 1,500 / PieceGet Latest Price
Product Details:
Minimum Order Quantity10 Piece
MaterialSteel,Metal
Parker provides a broad range of welded fittings. These include socketweld, buttweld,and orbital buttweld connections.Heat Code
Traceability is standard on all welded configurations.

TECHNICAL DESCRIPTION FOR WELD NIPPLE FITTINGS
Weld Nipple fittings Principle :-
weld nipple fittings with an O-ring seal between weld nipple and fitting body give impressive tear out resistance and sealing integrity.

Weld nipples SKA conform with DIN 3865 form A.

Fitting bodies and nuts are fully interchangeable for weld nipple and for 2/progressive ring fittings of the same series and external tube diameter.

Materials and surface protection:
Steel phosphated and oiled, O-ring of NBR (e.g. Perbunan).
Stainless steel 1.4571, O-ring of FPM (e.g. Viton)

Welding suitability and weldability
Weld nipples, tube bend weld nipples and ASK types made of steel are weldable according. to usual techniques. Types made of 1.4571 (stainless) are suitable for arc welding. The welding filler should be selected in accordance with DIN 8556 part 1 with consideration of the type of application and the welding technique.

Tube recommendation
We recommend the use of tubes in steel and stainless steel as illustrated in this catalogue.

Nominal Pressure (PN) of complete weld nipple fittings
The nominal working pressure (PN) of a complete weld nipple fitting is dependant upon the least rated component, i.e. tube, weld nipple or fitting. The component out of these three with the lowest rated pressure or working pressure determines the nominal pressure (PN) of the complete fitting.
Permissible temperature range
For weld nipples, tube bends with weld nipples and ASK types of steel with O-rings of
1. NBR (e.g. Perbunan): –35°C to + 100°C
2. FPM (e.g.viton): –25°C to + 200°C

without pressure reductions
For temperature range and necessary pressure reductions for weld nipples, weld nipple fittings and ASK types of 1.4571, see corresponding page.

Fitting assembly
1. Cut off the tube square, deburr and bevel the end of the tube in conformance with DIN 2559.
2. Slide nut onto the weld nipple.
3. Weld nipple to the tube according to normal welding procedure. The tube and nipple must be aligned.
Before welding, please remove the nut.
4. Dress the weld on the inside and outside.
5. Fit the O-ring without twisting. The taper, the nut and the cone must all be clean.
6. Oil the nut, taper and cone and thread before assembly
7. Screw on the nut by hand. Fully tighten using a spanner with 1/4 to 1/2 turns.
Make sure that the tube with the weld nipple is assembled straight and without in built stress.

Yes! I am interested
Request CallBack
Parker O-Lock Ofrs Fittings
Get Best Quote

Parker O-Lock Ofrs Fittings

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1 inch, 1/2 inch, 3/4 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
MaterialCopper

Parker-Hans

  • O-ring face seal tube fittings (also known as flat face or orfs fittings) have been proven to be very effective in eliminating leakage at higher pressures found in today''s hydraulic systems. Parker seal-lok fittings meet or exceed the requirements of sae j1453 and iso 8434-3.
  • Parker seal-lok fittings feature a captive o-ring groove (corg) design for optimal sealing, and prevention of o-ring fall-out prior to final assembly.
  • Parker o-ring face seal tube fittings are available in steel, stainless steel and 316 stainless steel.
  • The seal-lok fitting is the tube fittings division’s most recently developed fitting. It was introduced in an effort to eliminate leakage in hydraulic systems and allow higher operating pressures.
  • The seal-lok fitting is an o-ring face seal type fitting that consists of a nut, a fitting body, an o-ring and a sleeve.
  • A flat face sleeve is flanged or brazed to the tube and when the fitting is assembled, it compresses an o-ring in a precision machined groove in the fitting body to form a leak tight seal. Seal-lok fittings are suitable for any range of tube wall thick-ness and are also readily adaptable to pipe, metric tubing and hose. The seal-lok connection can be made with either metric or inch tubing by choosing the appropriate sleeve.
  • There are over thirty different body shapes and straights to choose from for specific applications. The body face has a groove which contains a high durometer o-ring that is held captive during installation. In addition, the seal-lok fitting body shapes are forged for added strength and longer service life. Straight products are made from cold drawn barstock. The cold drawing process ensures consistent dimensional tolerances, improved strength and better surface finish. Seal-lok fittings are manufactured with a captive o-ring groove (corg) design for prevention of o-ring fall-out prior to final assembly.
  • Seal-lok fittings meet or exceed all requirements of sae j1453 and are approved by det norske veritas for use in hydraulic systems up to size 38mm o. D. (1 1/2") as shown on certificate p-9538.

Yes! I am interested
Request CallBack
Parker Single Ferrule Fittings
Get Best Quote

Parker Single Ferrule Fittings

Approx. Price: Rs 265 / NumberGet Latest Price
Product Details:
Size3/4 inch, 1/2 inch, 2 inch, 1 inch, 3 inch
ApplicationPneumatic Connections, Hydraulic Pipe, Gas Pipe, Chemical Fertilizer Pipe, Structure Pipe
BrandParker
Parker fittings Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards. These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:
  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application 
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly 
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Hydraulic Fittings
Get Best Quote

Parker Hydraulic Fittings

Approx. Price: Rs 100 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationStructure Pipe, Hydraulic Pipe, Gas Pipe
Size1 inch-2 inch, 1/4 inch-1 inch
MaterialCopper
Parker fittings

PARKER-HANS
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:

  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
  • To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices. 

 


Yes! I am interested
Request CallBack
Ermeto Original Tube Fittings
Get Best Quote

Ermeto Original Tube Fittings

Approx. Price: Rs 150 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationStructure Pipe, Gas Pipe, Pneumatic Connections, Chemical Fertilizer Pipe, Hydraulic Pipe
Size1 inch, 3/4 inch, 1/2 inch
MaterialStainless Steel

Parker Fittings

Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.

These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.


Features:

  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
  • To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

 


Yes! I am interested
Request CallBack
Ermeto Hydraulic Fittings
Get Best Quote

Ermeto Hydraulic Fittings

Approx. Price: Rs 200 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationHydraulic Pipe, Gas Pipe, Structure Pipe
Size1 inch-2 inch, 1/4 inch-1 inch
MaterialCopper
Parker fittings

PARKER-HANS
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.

These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:

  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
  • To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices. 

 


Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Ermeto Fittings
Get Best Quote

Parker Ermeto Fittings

Approx. Price: Rs 100 / UnitGet Latest Price
Product Details:
BrandParker
Size1/2 inch, 3/4 inch
ApplicationGas Pipe, Structure Pipe
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards. These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:
  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application 
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly 
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

Yes! I am interested
Request CallBack
Ermeto Fittings
Get Best Quote

Ermeto Fittings

Approx. Price: Rs 897 / PieceGet Latest Price
Product Details:
Minimum Order Quantity5 Piece
Size1/2 inch, 3/4 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
TypeErmeto Fittings
ERMETO ORIGINAL TUBE FITTINGS

The bite type fitting was designed by Ermeto in Germany in the early 1930’s. Ermeto-fittings soon became popular due to the simple assembly which basically just requires two wrenches. Today, the EO fitting is the most widely used bite-type fitting in the world. EO fittings are designed for metric tube. All threads, hexagons, bores and other dimensions are purely metric. Historically it is based on German national standards 2353, DIN 3861, DIN 3859 and DIN 2353, which today are represented in the international standards ISO 8434. EO fittings are recognized for the high pressure performance from a compact body. EO fittings are available in the three series for low, medium and high pressures (LL, L and S-Series). This allows cost savings and -space minimized solutions for each specific application.

New Generation:
High performance tube fittings


The new, chromium6-free fitting generation from Parker Ermeto is called EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology systems and EO2-FORM for formed tube soft-sealed systems without cutting rings. The new generation is characterised by maximum safety even under extreme pressures of up to 800 bar nominal pressure.
The further development of the proven Dry Technology EO-2 concept is designated EO2-Plus and gives extremely high pressure ratings and greatly reduced tightening torques for the larger fitting sizes. EO2-FORM is the new high pressure tube connection from Parker Ermeto. This concept unites the advantages of welded connections with those of EO-2 technology proven worldwide in millions of applications.
The New Generation from Parker Ermeto clearly exceeds the performance requirements of DIN/ISO standards: with its guaranteed 4-fold design factor, the new fitting generation can be used at the following nominal pressures in steel:

  1. Up to 500 bar in the L series
  2. Up to 800 bar in the S series
  3. A unique 420 bar in the 20 S–38 S sizes
This extraordinary pressure and assembly performance can only be achieved by the use of even better and more resistant materials in combination with a special coating of individual components. This greatly extends the application range and the user does not have to sacrifice any advantages. Thanks to the higher pressure levels, less expensive “L” series fittings can now be used instead of the heavier “S” series.

Yes! I am interested
Request CallBack
Ermeto Hydraulic Tube Fittings
Get Best Quote

Ermeto Hydraulic Tube Fittings

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity100 Piece
ApplicationStructure Pipe
BrandErmeto Fittings

Ermeto DIN Male Stud High Pressure Hydraulic Tube Fittings

The main function of Ermeto DIN male stud high pressure hydraulic tube fittings is to connect different numbers of tubes and hoses. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless stee

Ermeto DIN Banjo Fittings

 

The main function of Ermeto DIN banjo fittings is to connect different numbers of tubes or hoses. This broad range of DIN fittings is available in steel with Cr(VI)-free surfaces and in stainless steel.

Ermeto DIN Fitting Components For High Pressure Hydraulic Tube Fittings

 

Ermeto DIN fitting components for high pressure hydraulic tube fittings are indispensable items in order to build up a complete fitting series (EO-PSR, EO-2, EO2-FORM).

Ermeto DIN Locknut Adjustable High Pressure Tube Fittings

The main function of Ermeto DIN locknut adjustable high pressure tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings isvailable in steel with Cr(VI)-free surfaces and in stainless steel.

Ermeto DIN Non Adjustable High Pressure Tube Fittings

 

The main function of Ermeto DIN non adjustable high pressure tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless steel

Plugs For Ermeto DIN High Pressure Hydraulic Fittings

 

The main function of plugs for Ermeto DIN high pressure hydraulic fittings is the safe closure of ports in hydraulic systems. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless steel.

Ermeto High Pressure Hydraulic Reducing Weld Nipple

 

Ermeto reducing weld nipples are suitable for all popular weld fittings and meet the stringent requirements which are placed on individual components in complex welding procedures.

Ermeto DIN Tube To Tube Swivel High Pressure Hydraulic Tube Fittings

 

The key function of Ermeto DIN tube to swivel high pressure hydraulic tube fittings is to connect different numbers of tubes or hoses. The fittings are available in steel with Cr(VI)-free surfaces and stainless steel.

Ermeto DIN Tube To Tube High Pressure Hydraulic Tube Fittings

 

The main function of Ermeto DIN tube to tube high pressure hydraulic tube fittings is to connect different numbers of tubes. This broad range of fittings is available in steel with Cr-(VI)-free surfaces and in stainless steel.

Ermeto High Pressure Hydraulic Weld Nipple

 

The wide Ermeto fitting range allows welded tube connections. Therefore, the weld nipple has to be welded onto the tube end. Using the standard Ermeto nut, this weld nipple can then be connected to the tube joint of any Ermeto tube fitting.

Ermeto DIN Port Reducers For High Pressure Hydraulic Tube Fittings

The main function of Ermeto DIN port reducers is to match the sizes of different ports. This range of port reducers is available in steel with Cr(VI)-free surfaces and stainless steel.

Ermeto High Pressure Hydraulic Tube Bend Weld Nipple

Ermeto tube bend weld nipples are suitable for all popular weld fittings and meet the stringent requirements which are placed on individual components in complex welding procedures.


Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: 6-8 WEEK
Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Ermeto Hydraulic Fittings
Get Best Quote

Parker Ermeto Hydraulic Fittings

Approx. Price: Rs 200 / PieceGet Latest Price
Product Details:
Minimum Order Quantity100 Piece
ApplicationHydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections, Gas Pipe
TypeFerrule
BrandErmeto Original ( EO), Ermeto original

Ermeto DIN fitting components for high pressure hydraulic tube fittings are indispensable items in order to build up a complete fitting series (EO-PSR, EO-2, EO2-FORM). The FM EO-2 functional nut is available with sealing NBR or sealing FKM.

Markets:
• Automotive
• Defense
• Energy
• Environment
• Industrial
• Infrastructure
• Machine Tools
• Materials Handling
• Mobile
• Oil and Gas
• Power Generation
• Process
• Transportation
• Water

Applications:
• Suitable for general hydraulic applications.

Features/ benefits:
• High corrosion resistance: The Cr(VI)-free surface treatment gives an average corrosion resistance of more than 500 hours to white rust. This attribute extends the life cycle of the fittings.
• Stainless steel surface: Ermeto DIN fitting components for high pressure hydraulic tube fittings, stainless steel version, have a high corrosion resistance to aggressive media and environmental influences, also a higher temperature resistance, than steel. These features extend the range of applications.
• Depending on the specific requirements, the FM EO-2 functional nut can be delivered with sealing NBR or sealing FKM. This feature increase the range of applications. TUBE O.D. (MM)

6-42

SHAPE

EO2-Functional nut, EO2-FORM Set for steel and stainless steel tubes, EO2-FORM Set for stainless steel tubes, Nut EO 24° Cone end, Cutting ring, Progressive stop ring, Progressive ring, Sleeve screw for threaded ports acc. to DIN 3854

SERIES

Very light, Light, Heavy

SIZE

na, M 08x1.0 to M42x2.0

MATERIAL

Steel/NBR, Steel/FKM, Stainless steel/FKM, Stainless steel/NBR, Steel/Stainless steel/NBR, Steel/Stainless steel/FKM, Steel, Stainless steel, Stainless steel SPH

SEAL MATERIAL

na, NBR, FKM

MAXIMUM WORKING TEMPERATURE (C)

+250 Steel, +400 Stainless Steel

MAXIMUM WORKING TEMPERATURE (F)

+482 Steel, +752 Stainless Steel

MINIMUM WORKING TEMPERATURE (F)

-40 Steel, -76 Stainless Steel

APPLICATION

Agriculture Equipment, Automotive Process, Chemical Transfer, Construction Equipment, Fuel transfer, Hydraulic, Manufacturing Equipment, Marine, Material Handling, Mobile Equipment, Oilfield, Packaging, Transportation

MINIMUM WORKING TEMPERATURE (C)

-40 Steel, -60 Stainless Steel

INDUSTRY STANDARDS

DIN ISO 8434


Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: READY STOCK
Yes! I am interested
Request CallBack
Parker Ermeto Fittings
Get Best Quote

Parker Ermeto Fittings

Approx. Price: Rs 200 / PieceGet Latest Price
Product Details:
Minimum Order Quantity5 Piece
Size1/2 inch, 3/4 inch, 2 inch
MaterialBrass Steel
ApplicationStructure Pipe, Gas Pipe

We are a renowned organization offering a comprehensive range of PARKER Hydraulic Fittings that is sourced from reputed manufacturers. These are extensively appreciated for superior performance, optimum functionality, durable finish standards and extended serviceability. Moreover, we also offer these at competitive prices. These hydraulic fittings can also be customized as per the specifications given by our clients. The product range comprises

 

Male stud couplingRun teeElbow
Male stud elbowStraight nippleHigh pressure Benjo
Male stud run teeSwivel elbowEqual cross
Weld type nippleSwivel teeLock nut
Bulkhead type unionSwivel unionFerrules

Yes! I am interested
Request CallBack
Ermeto Original Eo3 Tube Fittings
Get Best Quote

Ermeto Original Eo3 Tube Fittings

Approx. Price: Rs 550 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/2 inch, 3/4 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
MaterialSteel

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.

The EO-3 Fitting System can be used in Applications such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto High Pressure Hydraulic Weld Fitting
Get Best Quote

Ermeto High Pressure Hydraulic Weld Fitting

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity100 Piece
ApplicationPneumatic Connections
BrandPARKER ERMETO
    The custom-fit ASK weld fitting is used to connect tubes. The fitting is available as steel or stainless steel version and in all sizes from 6 - 38 mm.

    Markets: 
    • Press construction
    • Heavy machinery building
    • Power station construction
    • Shipbuilding

    Applications:                                                                                                                                            
    • Suitable for general hydraulic applications.

    Features/ benefits:
    • The elastomeric seal acts as a primary sealing element, making the connection leak-proof. So maintenance and re-work costs are substantially reduced.
    • Even after continuous operation for years under extreme conditions, the soft-seal weld fitting does not have to be retightened. This means that the connection has a long life and maintenance and servicing costs are noticeably diminished. 
    • Insufficiently assembled Ermeto high pressure hydraulic weld fittings do not come apart without warning. The user can react early enough because the connectors indicate the problem by leaking and they can be retightened.
    • Ermeto high pressure hydraulic weld fittings can be undone and then re-assembled any number of times. The longevity of the connector is thereby increased and costs saved. 

TUBE WALL THICKNESS (MM)

10x1.0 to 38x7.0

CONNECTION 1 TUBE O.D. (MM)

10 to 38

CONNECTION 1 STYLE

Butt weld

CONNECTION 2 STYLE

Butt weld

SERIES

Heavy

SHAPE

Weld fitting for tubes

TUBE O.D. (MM)

6-42

MAXIMUM WORKING TEMPERATURE (C)

+250 Steel, +400 Stainless Steel

MAXIMUM WORKING TEMPERATURE (F)

+482 Steel, +752 Stainless Steel

MAXIMUM WORKING PRESSURE (PSI)

3611-6904

MAXIMUM WORKING PRESSURE (MPA)

24.9-52.8

MAXIMUM WORKING PRESSURE (BAR)

249-476

MINIMUM WORKING TEMPERATURE (C)

-40 Steel, -60 Stainless Steel

MINIMUM WORKING TEMPERATURE (F)

-40 Steel, -76 Stainless Steel

CONNECTION TYPE

Bite Type, Soft Seal Bite Type

INDUSTRY STANDARDS

DIN ISO 8434

APPLICATION

Agriculture Equipment, Automotive Process, Chemical Transfer, Construction Equipment, Fuel transfer, Hydraulic, Manufacturing Equipment, Marine, Material Handling, Mobile Equipment, Oilfield, Packaging, Transportation

MATERIAL

Weldable Steel, Stainless steel


Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: READY STOCK
Yes! I am interested
Request CallBack
Parker Fittings E03
Get Best Quote

Parker Fittings E03

Approx. Price: Rs 750 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/4 Inch
MaterialSteel
TypeFerrule Fittings

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.

The EO-3 Fitting System can be used in Applications such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Yes! I am interested
Request CallBack
Parker Single Ferrule Bite Type Fittings
Get Best Quote

Parker Single Ferrule Bite Type Fittings

Approx. Price: Rs 450 / PieceGet Latest Price
Product Details:
Minimum Order Quantity10 Piece
Size1/2 inch, 3/4 inch
ApplicationStructure Pipe
TypeBrass, Steel, Copper
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features
  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

Working Principle:
  • Single Ferrule Bite Type Fitting is a flare less three-piece design fitting comprising of a Socket body having a precision conical seat, a one-piece precision machined hardened Progressive Ring (ferrule) and a Coupling Nut. When the Coupling Nut is progressively tightened it makes the Progressive Ring to move on to the tube which subsequently makes two bites into the outside diameter of the pipe, thereby forming a visible collar of material at A, ensuring a strong, reliable, high degree of safety and permanent sealing due to the outstanding construction & design of our progressive ring.
  • A second seal point at B is also created between the now bowed ferrule and the fitting body seat. The progressive ring in its dismantled state can be turned around while still on the tube.

Weld Fitting:
  • All coupling in this catalogue can however be supplied with our extremely reliable O-ring welding cones which has been specially designed to easily fit into the cone. The standard coupling nut can be used.

Standards & Specifications
  • Manufactured as per relevant as per industry standards such as DIN : 2353, DIN 3851, ISO : 8434 -1, ISO : 8434 – 4, IS:8805, BSI 5200, JIC, SAE J 514 / ISO 8434-2 etc.
  • Couplings are guaranteed interchangeable with products of other manufacturers corresponding to DIN 2353 in India and / or abroad.
Material Used:

  • The wide range of couplings and Single Ferrule Bite Type Fittings are manufactured in Steel, Stainless Steel 304/316 & Brass. O-ring supplied with the fitting is made of NBR (e.g. Perbunan) having shore hardness of 90º + 5º & temperature range of -35º up to +100º C.FPM (e.g. Viton -25º up to +200º C) can also be supplied on request.
  • Complex shapes such as elbows, tees, etc are manufactured from hot forging, which has obvious advantage over plate in extreme strength & high impact resistance
  • Straight fittings are manufactured from cold drawn bar stock
  • Profile bodies may also be used for shaping item wherever required

Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),D/A
  • Port of Dispatch: INDIA
  • Delivery Time: READY STOCK
Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto Pneumatic Equipment Tube Fittings
Get Best Quote

Ermeto Pneumatic Equipment Tube Fittings

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/4 Inch
MaterialSteel
Automatic GradeSemi-Automatic

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.

The EO-3 Fitting System can be used in Applications such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Yes! I am interested
Request CallBack
Ermeto Fittings ( Eo / Eo2 / Eo3), Pipe & Tube Fittings
Get Best Quote

Ermeto Fittings ( Eo / Eo2 / Eo3), Pipe & Tube Fittings

Approx. Price: Rs 350 / PieceGet Latest Price
Product Details:
Minimum Order Quantity25 Piece
ApplicationGas Pipe, Hydraulic Pipe, Structure Pipe
Size3/4 inch
MaterialSteel
EO and EO-2 Metric Bite Type Fittings
For more than 80 years, Parker Hannifin, the world's leading manufacturer of motion and control technology, has been developing high-pressure hydraulic fittings and setting standards globally. Over the years, new geometries and materials have improved the performance, reliabilty, and ease of installation of the original Ermeto fittings. Therefore, leakages in piping systems today cannot be ascribed to material defects, as they could be previously, but rather to improper installation. Assistance is provided in this regard by the new, quickly installable EO-3® fitting system. Its innovative form and technology raise pipe installation to a high level of quality, security, and economy.


Conical Connection Enables Seamless Installation:

  • When it comes to fittings, correct installation is essential, because the effects of leakages are not pleasent: cost-intensive downtimes, customer complaints, reworking, environmental damage, and even accidents. Given this context, with the EO-3® system Parker has developed a coupling concept that sets whole new standards. EO-3® fittings enable simpler, quicker, and more secure installations. This is achieved with a new thread technology. In contrast to all prior (DIN-standard) fittings, the EO-3® system is based on a 24-degree inner cone with integrated soft seal and a cone-shaped connecting thread. The world's first and unique system of this kind, the EO-3® fitting enables the control of installation results from the outside. Using a yellow indication ring, the installer can tell immediately whether the fitting has been made correctly. EO-3® fittings can be installed considerably quicker than conventional fitting systems on the market. The EO-3® installation requires neither a torque wrench nor a wrench extension - a common open-ended wrench will suffice. With pipe sizes from 25 millimeters, an octagonal screw nut - instead of a standard hexagonal screw nut - ensures for increased ease of installation. The ocatgonal screw nut makes access easier with the open-ended wrench in tight construction spaces. The wrench must not be changed so frequently, meaning the installation speed increases.


Machine Pipe Forming with Proven Technology:

  • For the new bolt connections, Parker uses the EO forming machine tool that is already on the market. With the machines users have been using up until now to produce, for example, the EO2-FORM connections, users can also create EO-3® fittings- an important contribution to cost reduction. This merely requires the respective EO-3® forming dies.


Ability to be Combined and Flexible Employment:

  • In addition to rigid tubework, many applications demand flexible hose connections. EO-3® is applicable in both variants. Linking to existing EO-2 connections is also possible without any problems thanks to an adapter. This means "old" fittings can be converted or upgraded to the EO-3® system at virtually no additional cost. The new fitting system offers four times as much safety and does away with the standard LL, L, and S series classifications that have previously been customary. But for a new exceptions, a single pressure stage of 420 bar applies to all tube sizes. Elastomeric materials can be selected specifically for applications and, thus, media.


Benefits of the new Concept at a Glance:

  • Immediately detectable thread intake
  • Quick manual pre-installation
  • Safer installation due to less effort
  • Less space requirement for installing in difficult installation situations
  • Shorter installation time
  • Indication ring as a control option for the installer
  • Soft seal integrated in the cone improves sealing behavior - even with high system dynamic

 


Yes! I am interested
View PDF
Request CallBack
Parker Hydraulic Hose Fittings
Get Best Quote

Parker Hydraulic Hose Fittings

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size2 inch-3 inch, 1/4 inch-1 inch, 1 inch-2 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
MaterialBrass
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation.

Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.

Fittings from Parker are available in a variety of styles including:
As one of the leading Hose fitting adapters and clamps traders in Delhi, we make sure to serve to the diverse hose fitting, adapters and clamps requirements of the customers.

HYDRAULIC HOSE FITTING:We offer a wide variety of Hydraulic hose fittings within Delhi and throughout the country. As Hydraulic hose fitting suppliers we ensure to make prompt supplies within agreed time-frame.

Our provided Hydraulic hose fitting is available in carbon steel and stainless steel materials. Threads available are NPT, BSP 60, and ORFS, JIC 37/45 degree cone, SAE flange, Metric threads, komatsu fittings & any special thread/design as per customer requirement.

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Fittings
Get Best Quote

Parker Fittings

Approx. Price: Rs 150 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/2 inch, 3/4 inch, 1 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections
TypeBrass, Copper, Iron
Parker Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards. These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.

Features:
  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P
Yes! I am interested
Request CallBack
EO And EO-2 Metric Bite Type Fittings
Get Best Quote

EO And EO-2 Metric Bite Type Fittings

Approx. Price: Rs 250 / UnitGet Latest Price
Product Details:
Minimum Order Quantity100 Unit
Size1/4 Inch
TypeFittings
MaterialSteel

The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.

The EO-3 Fitting system can be used in Applications such as:

  • Rigid tube connections and hose applications
  • All external tube diameters from six to 42 millimeters
  • Temperatures from -40°F to +248°F (-40° to +120°C)

Yes! I am interested
Request CallBack
Parker Ferrule Fittings
Get Best Quote

Parker Ferrule Fittings

Approx. Price: Rs 100 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1/2 inch, 3/4 inch, 1 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
MaterialSteel, Iron

Parker Hannifin, the world leader in drive and control technologies, has opened near Bielefeld a new technology and manufacturing center for high-quality piping connection systems. In this "Complete Piping Solution Center" (CPS Center), design solutions are developed for creating piping connection systems which find application in machinery construction, vehicle manufacture and shipbuilding, wind power and many other market segments. CPS Centers are already in operation in the USA, Norway and South Korea and there are plans for more locations in the Asia region. As the latest link in this chain, the operation in August dorf, near Bielefeld, belongs organizationally to the Tube Fittings Division Europe (TFDE), which has its headquarters in Bielefeld-Windelsbleiche. Furthermore, this new CPS Center is situated in strategically favorable proximity to Parker's central warehouse for Europe in Bielefeld-Oldentrup; this is the central hub for the warehousing and despatch of all Parker products throughout the whole of Europe. Under the world-famous brand name "Ermeto", classical DIN and SAE standard hydraulic connection systems, up to outside tube diameters of 42 mm (2 inches), are produced by the manufacturing locations of the Parker Tube Fittings Division Europe. This new CPS Center represents an important addition to the core business. It is here that large-size pipes and flanges are designed, manufactured, connected into a complete system, delivered straight to the assembly point and finally assembled, all in accordance with customer requirements. Demand is increasing for comprehensive system solutions which go beyond the manufacture of individual component parts to include the important benefits arising from advisory services for the design, manufacture and installation of hydraulic piping systems. From the customers' viewpoint, their machinery is becoming ever more powerful and equipment manufacturers are under more pressure than ever from increasing costs and safety requirements. Equally important to manufacturers is the demand for space-saving hydraulic piping systems. With its new CPS Centers, Parker offers this in-demand service and can satisfy ever-increasing needs. At the start of a project, Parker's systems engineers establish the customer's requirements and then on the basis of this, develop an application-specific pipe layout design complete with drawings and documentation. After the customer's approval, the pipes, with outside diameters up to 220 mm, are coldformed on the latest CNC bending machines. These enable bending radii of 2xD to 3xD to be achieved, depending on requirement. The finish-machined and cleaned pipes are then assembled in accordance with the customer's requirements and delivered to the Parker central warehouse for onward dispatch. If the customer requires, Parker experts will undertake the assembly, flushing out and final acceptance of the piping system. This kind of support from Parker gives customers the opportunity to significantly reduce their own personnel resources and thus save costs. So the Complete Piping Solutions concept constitutes a comprehensive system which in the fields of machinery construction, vehicle making and shipbuilding, as well as offshore applications, shows strong demand and has been widely applied. The customer of course will decide whether to take up the complete solution of have Parker carry out, for example, only the design or assembly. Customers and users can rely not only on the experience and expert know-how of Parker's systems engineers and technicians, but also increase their productivity and significantly reduce design times.


Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Parker Tube Fittings
Get Best Quote

Parker Tube Fittings

Approx. Price: Rs 165 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
Size1 inch, 1/2 inch, 3/4 inch
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
MaterialSteel

Parker Hannifin, the world leader in drive and control technologies, has opened near Bielefeld a new technology and manufacturing center for high-quality piping connection systems. In this "Complete Piping Solution Center" (CPS Center), design solutions are developed for creating piping connection systems which find application in machinery construction, vehicle manufacture and shipbuilding, wind power and many other market segments. CPS Centers are already in operation in the USA, Norway and South Korea and there are plans for more locations in the Asia region. As the latest link in this chain, the operation in Augustdorf, near Bielefeld, belongs organisationally to the Tube Fittings Division Europe (TFDE), which has its headquarters in Bielefeld-Windelsbleiche. Furthermore, this new CPS Center is situated in strategically favourable proximity to Parker's central warehouse for Europe in Bielefeld-Oldentrup; this is the central hub for the warehousing and despatch of all Parker products throughout the whole of Europe. Under the world-famous brand name "Ermeto", classical DIN and SAE standard hydraulic connection systems, up to outside tube diameters of 42 mm (2 inches), are produced by the manufacturing locations of the Parker Tube Fittings Division Europe. This new CPS Center represents an important addition to the core business. It is here that large-size pipes and flanges are designed, manufactured, connected into a complete system, delivered straight to the assembly point and finally assembled, all in accordance with customer requirements. Demand is increasing for comprehensive system solutions which go beyond the manufacture of individual component parts to include the important benefits arising from advisory services for the design, manufacture and installation of hydraulic piping systems. From the customers' viewpoint, their machinery is becoming ever more powerful and equipment manufacturers are under more pressure than ever from increasing costs and safety requirements. Equally important to manufacturers is the demand for space-saving hydraulic piping systems. With its new CPS Centers, Parker offers this in-demand service and can satisfy ever-increasing needs. At the start of a project, Parker's systems engineers establish the customer's requirements and then on the basis of this, develop an application-specific pipe layout design complete with drawings and documentation. After the customer's approval, the pipes, with outside diameters up to 220 mm, are coldformed on the latest CNC bending machines. These enable bending radii of 2xD to 3xD to be achieved, depending on requirement. The finish-machined and cleaned pipes are then assembled in accordance with the customer's requirements and delivered to the Parker central warehouse for onward despatch. If the customer requires, Parker experts will undertake the assembly, flushing out and final acceptance of the piping system. This kind of support from Parker gives customers the opportunity to significantly reduce their own personnel resources and thus save costs. So the Complete Piping Solutions concept constitutes a comprehensive system which in the fields of machinery construction, vehicle making and shipbuilding, as well as offshore applications, shows strong demand and has been widely applied. The customer of course will decide whether to take up the complete solution of have Parker carry out, for example, only the design or assembly. Customers and users can rely not only on the experience and expert know-how of Parker's systems engineers and technicians, but also increase their productivity and significantly reduce design times.


Yes! I am interested
Request CallBack
Parker Triple Lok JIC Fittings
Get Best Quote

Parker Triple Lok JIC Fittings

Approx. Price: Rs 550 / PieceGet Latest Price
Product Details:
Minimum Order Quantity25 Piece
MaterialCarbon Steel
ShapeEqual
TechnicsForged

Parker's 37° Flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.


Markets:

  • Construction
  • Military Ground Systems
  • Aerial Lift
  • Agriculture
  • Material Handling
  • Military Marine
  • Engine Transmission


Features/Benefits:

  • Easily adaptable to inch tube, metric tube and hose giving it worldwide acceptance.
  • Vast selection of port end options, including SAE Straight Thread O-ring Boss (ORB), NPTF, BSPP-ED, BSPP-O-ring Retaining Ring (ORR), BSPP, BSPT, ISO 6149, Metric-O-ring Retaining Ring (ORR), and Metric-ED
  • Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly mistake-proof.
  • Steel fittings substantially exceeded the SAE corrosion requirements of 72 hours without red rust, lasting up to 1,000 as found by an independent test facility.
  • Stainless Steel nuts have a coating to prevent galling.
  • Available in steel, stainless steel, and brass in sizes 1/8” - 2 ½” with working pressures up to 7500 psi.


Applications:

  • Hydraulic fluid and gas handling connections

Yes! I am interested
Request CallBack
Parker Ermeto Fittings
Get Best Quote

Parker Ermeto Fittings

Approx. Price: Rs 155 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
SizeHydraulic fittings parker
MaterialStainless Steel
Steel GradeSS316L

We provide a wide range of industrial Parker Ermeto Fittings that are manufactured using highly flexible raw material that is procured from reliable vendors. These industrial hoses are resistant from all kinds of harsh treatment during their usage.


Yes! I am interested
View PDF Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto Tube Fittings
Get Best Quote

Ermeto Tube Fittings

Approx. Price: Rs 100 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
ApplicationStructure Pipe
MaterialCarbon Steel
ShapeEqual
TechnicsForged
We are offering Ermeto Tube Fittings to our clients.

Yes! I am interested
Request CallBack
Parker Triple Lok  Soft Seal Flare JIC Tube Fittings
Get Best Quote

Parker Triple Lok Soft Seal Flare JIC Tube Fittings

Approx. Price: Rs 250 / PieceGet Latest Price
Product Details:
Minimum Order Quantity200 Piece
ApplicationHydraulic Pipe
MaterialCS/SS
BrandPARKER
Thread SizeJIC,UNF
    Parker's soft seal 37° flare JIC tube fittings and adapters, Triple-Lok 2, offer the versatility of the popular metal to metal seal with the added advantage of an elastomeric seal in the nose of the 37° flare. This design creates superior sealing performance in metal-to-metal seal applications with working pressures up to 20% more than standard stainless steel metal to metal 37° flare JIC tube fittings and adapters.

    Markets:
    • Oil and Gas
    • Unmanned Submarines
    • Marine
    • Power Generation
    • Pulp and Paper
    • Semiconductor

    Features/Benefits:
    • Specifically engineered groove design that prevents nose collapse.
    • Easily adaptable to inch tube, metric tube and hose giving it worldwide acceptance.
    • Interchangeable with standard 37° flared fittings and features a replaceable standard O-ring seal.
    • Exceeds all performance requirements of SAE J514.
    • Vast selection of port end options, including SAE Straight Thread O-ring Boss (ORB), NPTF, BSPP-ED, BSPP-O-ring Retaining Ring (ORR), BSPP, BSPT, ISO 6149, Metric-O-ring Retaining Ring (ORR), and Metric-ED.
    • Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly mistake-proof.
    • Available in stainless steel in sizes ¼“through 2” with working pressures up to 9000 psi.

    Applications:
    • Hydraulic fluid and gas handling connections
MAXIMUM WORKING PRESSURE (MPA)

62 (Dynamic Pressure)

MAXIMUM WORKING PRESSURE (BAR)

621 (Dynamic Pressure)

CONNECTION TYPE

Flare

MATERIAL

Stainless Steel

SHAPE

90°, Staight, and Tee

MAXIMUM WORKING PRESSURE (PSI)

9000 (Dynamic Pressure)

APPLICATION

Various

CONNECTION 3 STYLE

Male 37° Flare with O-ring Seal on Nose

CONNECTION 3 TUBE O.D. (INCH)

1/2, 3/8 and 1

O-RING MATERIAL

90 Durometer Nitrile

INDUSTRY STANDARDS

SAE J514


Additional Information:
  • Port of Dispatch: DELHI
  • Delivery Time: 6-8 WEEK
  • Packaging Details: BOX PACKING
Yes! I am interested
Request CallBack
Parker Ermeto Stainless Steel Fittings
Get Best Quote

Parker Ermeto Stainless Steel Fittings

Approx. Price: Rs 1,500 / UnitGet Latest Price
Product Details:
Minimum Order Quantity10 Unit
Size3/4
ApplicationStructure Pipe, Gas Pipe, Hydraulic Pipe
ConditionNew
ERMETO ORIGINAL TUBE FITTINGS

The bite type fitting was designed by Ermeto in Germany in the early 1930’s. Ermeto-fittings soon became popular due to the simple assembly which basically just requires two wrenches. Today, the EO fitting is the most widely used bite-type fitting in the world. EO fittings are designed for metric tube. All threads, hexagons, bores and other dimensions are purely metric. Historically it is based on German national standards 2353, DIN 3861, DIN 3859 and DIN 2353, which today are represented in the international standards ISO 8434. EO fittings are recognised for the high pressure performance from a compact body. EO fittings are available in the three series for low, medium and high pressures (LL, L and S-Series). This allows cost savings and -space minimized solutions for each specific application.

New Generation:
High performance tube fittings


The new, chromium6-free fitting generation from Parker Ermeto is called EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology systems and EO2-FORM for formed tube soft-sealed systems without cutting rings. The new generation is characterised by maximum safety even under extreme pressures of up to 800 bar nominal pressure. The further development of the proven Dry Technology EO-2 concept is designated EO2-Plus and gives extremely high pressure ratings and greatly reduced tightening torques for the larger fitting sizes. EO2-FORM is the new high pressure tube connection from Parker Ermeto. This concept unites the advantages of welded connections with those of EO-2 technology proven worldwide in millions of applications.
The New Generation from Parker Ermeto clearly exceeds the performance requirements of DIN/ISO standards: with its guaranteed 4-fold design factor, the new fitting generation can be used at the following nominal pressures in steel:

  1. Up to 500 bar in the L series
  2. Up to 800 bar in the S series
  3. A unique 420 bar in the 20 S–38 S sizes
This extraordinary pressure and assembly performance can only be achieved by the use of even better and more resistant materials in combination with a special coating of individual components. This greatly extends the application range and the user does not have to sacrifice any advantages. Thanks to the higher pressure levels, less expensive “L” series fittings can now be used instead of the heavier “S” series.

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Ermeto Ferrule Fittings
Get Best Quote

Ermeto Ferrule Fittings

Approx. Price: Rs 150 / PieceGet Latest Price
Product Details:
Size1 inch, 3/4 inch, 1/2 inch
Application Pneumatic Connections, Chemical Fertilizer Pipe, Hydraulic Pipe
MaterialStainless Steel

Parker Fittings

Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.

These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.


Features:

  • These Single Ferrule Bite Type fittings and accessories (Three Series)are manufactured in accordance with DIN 2353 for fluid application
  • The three components of Single Ferrule Bite Type Fittings are designed to produce a strong, reliable, leak-free joint upon proper assembly
  • Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible
  • To cater all your requirements of Hydraulic & Pneumatic application from one window, we have been manufacturing variety of Single ferrule Bite Type Fittings and couplings since last 15 years. These Single Ferrule Bite Type Fittings are available in diverse material specifications including steel and brass. We also design & supply duly assembled, complete lubrication, hydraulic and / or coolant circuits of various machines at most economical prices.

Yes! I am interested
X