Parker Filters High & Low Pressure
Parker's hydraulic filters and portable purification systems are designed to meet equipment specifications and to ensure superior performance of low-, medium- or high-pressure hydraulic systems. Applications include industrial, mobile, marine, mining, oil and gas, ground support, and hydraulic service.
The Maxiflow Series is a range of spin-on filters designed to provide low cost quality protection for hydraulic or lubrication systems.
Maximum pressure 10 bar. Maximum flow 360 l/min.
Parker's Moduflow™ Plus series suction/return/duplex patented filter element features longer life and increased dirt capacity. Allowable operating pressure of 200PSI/13.8Bar and capable of flows up to 150GPM/581LPM depending on viscosity.
Racor Fuel Water Separator
|Length||43.7 to 558.8 mm|
|Thread Size||1/4 to 1 1/16 inch|
|Height||1 23/32 to 47 inch|
|Width||101.6 to 723.9 mm|
|Outside Diameter||73.8 to 154.0 mm|
|Inside Diameter||12.7 to 83.3 mm|
Diesel fuel particulate filtration and fuel-water separation
Parker Racor Hydraulic Filter
|Operating Pressure||10- 20 Bar|
The EP Ultrafiltration (UF) Spiral Cross Flow Filter Element is constructed with a Polyvinylidene fluoride (PVDF) membrane for extended life and superior chemical resistance in electrocoat and industrial filtration applications.Diesel And Biodiesel (FAME) Protection From Particulate And Water Contaminants Velcon Aquacon® Diesel (AD) filters can remove both particulate and water contaminants in fuels to meet stringent downstream ISO 4406 and ASTM D975 cleanliness standards for both diesel or biodiesel fuels.Fluoroflow-HSA Pleated Membrane Filter Cartridge | All-Fluoropolymer PTFE For Chemical Resistance In Aggressive ApplicationsThe Fluoroflow®-HAS pleated membrane filter cartridge provides good flow rates and on-stream life. The enhanced pleating provides more than 40% more surface area than our standard Fluoroflow filter cartridge.IcountOS - Portable Condition Monitoring For Oil And Fuel Systems.
The Parker icountOS (IOS) is an innovative solution for measuring the quality of hydraulic oils and hydrocarbon fuels in many different applications. This self-contained laser detection particle counter is portable, for quick and easy field analysis.Portable Filtration System Guardian Series Parker's Guardian Portable Transfer Unit is a hand-held unit designed to filter new fluids, and polish the existing fluids in a system to reduce contamination levels. Lightweight and compact, ideal for one person operation and on-site conditioning.Sterile Gas Filter Integrity Unit, Valairdata 3.
Valairdata 3 is a fully automated, aerosol challenge integrity test unit, designed to test the integrity of sterile gas filters quickly and easily.Tanktop Mounted Return Line Filter - Tanktopper Series The Tanktopper return line filter series features an integrated, 10µ abs. air breather. LEIF® Ecoglass elements available. An all-in-one, easy-to-mount filter range for more compact tank design. Maximum pressure 10 bar. Maximum flow 650 l/min.RF-180 Bag Filter Parker's RF-180 bag filters offer a truly innovative design. Providing long life protection for combustion air on locomotives, gen-sets, and other applications that demand a high air flow, the RF-180 bag filter offers proven performance.Compressed Air And Gas - Up To 800 PSIG - M-SeriesParker’s Finite filters make it possible to improve process efficiency and provide optimal process protection.Dynavane Self-Cleaning Inertial Air Filter.
Parker's Dynavane Self-cleaning Inertial Air Filter is compact, self-cleaning, and environmentally friendly. Designed to handle large volumes of air at high velocities, this filter provides long, trouble-free service under the most difficult conditions.Replacement Cartridge Filter Elements – Racor P Series P Series Replacement Filter Elements are designed for use in Racor P3, P4, and P5 Diesel Fuel Conditioning Modules. The elements utilize proprietary Aquabloc® engineered media, which provides excellent water removal and dirt-holding capabilities.
Parker Hydraulic Filters
|Media Rating||1-100 micro|
The parker filtration group works hand-in-hand with the parker aerospace group, hydraulic systems division (hsd), to develop innovative, custom on-board solutions that help ensure safe operation, lower weight, protect flight-critical components and reduce maintenance costs. Hsd is the global leader in fully integrated hydraulic systems. The parker filtration group is recognized worldwide for filtration and fluid condition monitoring systems that protect against contamination, the number one cause of hydraulic system failure. For more information on aerospace hydraulic filtration, prior to the availability of parker''s medium pressure filter series, applications were restricted by limitations of a spin-on can, or were forced into the higher cost range of high pressure filters. the need for economical, medium pressure range filters with excellent fatigue pressure ratings has been met by parker hydraulic filter division.
Parker High Pressure In-Line Filter
Minimum Order Quantity: 100 Piece
|Flow Rate||500-1000 m^3/hr|
|Outlet Pressure Range||345 bar|
|Nominal Bore||5.6 mm|
|Maximum Operating Temperature||250 Deg C|
Hypersep STH & SFH Series High Pressure Centrifugal Water Separator (For Pressures Up To 40 Barg)
PED approved centrifugal high pressure water separators with low pressure drop for the removal of bulk condensate water from compressed air in industrial application OIL-X ACS 'Point Of Use' Oil Vapour Removal Filter Activated carbon filters for the removal of oil vapour and hydrocarbon odours, providing a maximum remaining oil content of <0.003mg/m³ (<0.003ppm) @ 21°C (70°F).Marine Fuel Filter Water Separator – Racor Spin-On Series Racor Marine Spin-on Series Fuel Filter Water Separators provide maximum protection of modern engines by effectively removing water, sand, dirt, and rust contamination from fuel. UL-approved versions available.
High Pressure Inline Filter WPF Series
The new industry standard in high pressure hydraulic filtration incorporating advanced features designed to improve system reliability. Allowable operating pressure of 7000 PSI (483 Bar) and capable of flows to 137 GPM (520 LPM) depending on viscosity.Vacuum Pump Exhaust Filters Remove all visible oil mist and smoke from vacuum pump exhaust even when it is saturated with oil GH Series High Pressure Compressed Air Filter (For Pressures Up To 350 Bar G) High pressure filters for compressed air applications up to 350 bar g with optimized flow rates and improved housing design for high energy efficiency, maximum reliability and safe operation.BAM Breathing Air Purifiers (Flow Rates Up To 1426m³/H @ 7 Barg)
- Port of Dispatch: DELHI
- Delivery Time: 6-8 WEEK
Parker Domnick Hunter Air Filter
|Max Temperature (Degrees F)||0-100 Degrees F, 100-150 Degrees F|
|Max Operating Temperature||65 Deg C|
Of the ten major contaminants found in compressed air, nine are removed using filtration technology, however, are all compressed air and gas filters the same Compressed air purification equipment is essential to all modern production facilities. It must deliver uncompromising performance and reliability while providing the right balance of air quality with the lowest cost of operation. Today, many manufacturers offer products for the filtration and purification of contaminated compressed air, which are often selected only upon their initial purchase cost, with little or no regard for the air quality they provide, the cost of operation throughout their life or their environmental impact. When purchasing purification equipment, delivered air quality, the overall cost of ownership and the equipment's environmental impact must always be considered.
Water separators are used to protect coalescing filters against bulk liquid contamination, where excessive cooling takes place in air receivers and distribution piping.Using mechanical separation techniques, Parker domnick hunter Water Separators will remove in excess of 92% bulk liquid contamination at all flow conditions.
Coalescing Compressed Air Filters:
Coalescing compressed air filters are probably the single most important items of purification equipment in a compressed air system. They are designed to not only remove aerosols (droplets) of oil and water using mechanical filtration techniques, but also to remove solid particulate to very low levels (as small as 0.01 micron in size). Installed in pairs, the first compressed air filter is a 'general purpose filter' which protects the second 'high efficiency filter' from bulk contamination. The dual filter installation from Parker domnick hunter ensures a continuous supply of high quality compressed air with the additional benefits of low operational costs and minimal maintenance.
Adsorption (Activated Carbon) Filters:
Oil vapor is oil in a gaseous form and will pass through a coalescing filter just as easily as the compressed air. Therefore, oil vapor removal filters must be employed as these provide a large bed of activated carbon adsorbent for the effective removal of oil vapor, providing the ultimate protection against oil contamination.
Absolute removal of solid particulates and micro-organisms is performed by a sieve retention or membrane filter. They are often referred to as sterile air filters as they also provide sterilized compressed air. Filter housings are manufactured from stainless steel to allow for in-situ steam sterilization of both the filter housing and element. It is important to note that the piping between the sterile filter and the application must also be cleaned and sterilized on a regular basis.The quality of air required throughout a typical compressed air system will vary depending upon application. Treatment of the compressed air at only one point alone, for example the compressor room; is not enough and it is highly recommended that the compressed air is first treated prior to entry into the distribution system (to a quality level suitable for protecting air receivers and distribution piping) and then at the point of use, with specific attention being focused on the application and the level of air quality .